Použití metody digitální obrazové korelace při měření zbytkových napětí pomocí odvrtávací metody
Loading...
Date
Authors
Plucnar, Tomáš
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zabývá měřením zbytkových napětí za pomoci korelace digitálního obrazu (DIC). V práci jsou popsána zbytková napětí a také je zde odvozen analytický popis přetvoření v okolí odvrtané díry, který je důležitý pro vyhodnocení experimentu. Největší část diplomové práce je věnována měření zbytkových napětí a taky jejich vyhodnocení. V rámci práce byla provedena měření zbytkových napětí pro vzorky s předvrtanou dírou a také pro plné vzorky do kterých se odvrtávala díra. Na těchto měřeních pak byly vyhodnoceny vlivy jednotlivých nastavení DIC softwaru na vyhodnocené zbytkové napětí. Měření na vzorcích s předvrtanou dírou bylo využito pro zjištění vlivu hustoty náhodného vzoru a taky vlivu kamery na vyhodnocené zbytkové napětí.
The thesis focuses on the measurement of residual stresses using digital image correlation (DIC). The work describes residual stresses and also derives an analytical description of the deformation around a drilled hole, which is essential for evaluating the experiment. The largest part of the thesis is dedicated to the measurement and evaluation of residual stresses. Within the framework of the thesis, measurements of residual stresses were conducted for samples with pre-drilled holes and also for solid samples into which holes were drilled. These measurements were then used to evaluate the effects of various DIC software settings on the assessed residual stress. Measurements on samples with pre-drilled holes were used to determine the impact of the random pattern density and the influence of the camera on the evaluated residual stress.
The thesis focuses on the measurement of residual stresses using digital image correlation (DIC). The work describes residual stresses and also derives an analytical description of the deformation around a drilled hole, which is essential for evaluating the experiment. The largest part of the thesis is dedicated to the measurement and evaluation of residual stresses. Within the framework of the thesis, measurements of residual stresses were conducted for samples with pre-drilled holes and also for solid samples into which holes were drilled. These measurements were then used to evaluate the effects of various DIC software settings on the assessed residual stress. Measurements on samples with pre-drilled holes were used to determine the impact of the random pattern density and the influence of the camera on the evaluated residual stress.
Description
Citation
PLUCNAR, T. Použití metody digitální obrazové korelace při měření zbytkových napětí pomocí odvrtávací metody [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Inženýrská mechanika
Comittee
prof. Ing. Jan Vimmr, Ph.D. (předseda)
prof. Ing. Luboš Náhlík, Ph.D. (místopředseda)
prof. Ing. Jindřich Petruška, CSc. (člen)
prof. Ing. Jiří Burša, Ph.D. (člen)
prof. RNDr. Michal Kotoul, DrSc. (člen)
doc. Ing. Stanislav Věchet, Ph.D. (člen)
prof. Ing. Jaroslav Zapoměl, DrSc. (člen)
prof. Ing. Pavel Hutař, Ph.D. (člen)
doc. Ing. Tomáš Návrat, Ph.D. (člen)
Ing. László Iván, Ph.D. (člen)
Date of acceptance
2024-06-11
Defence
Při obhajobě student nejprve prezentoval svoji diplomovou práci, následně byly přečteny posudky a student odpovídal na dotazy oponenta. Poté členové komise položili následující dotazy k diplomové práci:
Použitou metodou je tedy fázová korelace? Pokud jsou srovnávané obrazy velmi rozdílné, tak metoda nebude fungovat, je to tak? Obrazy mohou být jen navzájem posunuté, nebo mohou být i deformované? Máte nějaké srovnání s výsledky získanými pomocí tenzometrické růžice? Který způsob je přesnější?
Zmínil jste, že zbytková napětí měla v některých případech negativní dopad na některé naměřené výsledky. Můžete to vysvětlit?
V jaké vzdálenosti byla kamera snímající objekt?
Komise na neveřejném zasedání obhajobu zhodnotila známkou B (velmi dobře).
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení