High Temperature Deformation Mechanisms
Loading...
Date
Authors
Heczko, Milan
ORCID
Advisor
Referee
Mark
P
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Dvě pokročilé vysoce legované austenitické oceli s Fe-Ni-Cr matricí byly studovány za podmínek nízkocyklové únavy jak za pokojové tak vysoké teploty. Široká škála experimentálních a charakterizačních nástrojů byla použita ke studiu vzájemně souvisejících aspektů zahrnujících chemické složení slitin, mikrostrukturu, deformační mechanismy a celkovou odezvu materiálů na externě působící zatížení. Klíčové mechanismy a faktory definující mechanické vlastnosti a výkonnost v reálném provozu byly analyzovány a diskutovány v souvislosti s materiálovým designem. • Standardní únavové experimenty byly provedeny za pokojové teploty a teploty 700°C. Byly získány křivky cyklického zpevnění/změkčení, cyklické deformační křivky, Coffin-Manson a Wöhlerovy křivky. • Ke studiu změn mikrostrukturního stavu slitin v důsledku cyklického zatěžování za pokojové a zvýšené teploty byla použita široká škála technik charakterizace pomocí elektronové mikroskopie. • Únavové chování, pevnost a cyklická plastická odezva studovaných materiálů byla vysvětlena v souvislosti s mikrostrukturními změnami a mikrostrukturními aspekty deformačních mechanismů jak za pokojové tak za zvýšených teplot. • Bylo zjištěno, že Sanicro 25 vykazuje nejvyšší pevnostní charakteristiky ze všech materiálů stejné třídy. Výjimečné vlastnosti této slitiny jsou spojeny s populacemi dvou typů nanočástic, koherentními precipitáty bohatými na měď a nanočásticemi typu MX s charakteristikou disperzoidu. Tyto nanočástice mají klíčový vliv na pevnost a celkovou cyklickou odezvu. V důsledku interakcí s precipitáty způsobujících zachytávání je pohyb dislokací v Sanicro 25 významně zpomalen, což vede k potlačení normálních procesů zotavení obvykle vedoucích ke změně uspořádání dislokační struktury tak, aby byla celková vnitřní energie systému co nejnižší. Takové uspořádání je tvořeno například dislokačními buňkami. Jelikož jsou procesy zotavení potlačeny, dislokační struktura za vysokých teplot je charakteristická homogenní distribucí dislokací o vysoké hustotě s velkou mírou vzájemných interakcí. V kombinaci s dalšími mechanismy zpevnění jako jsou precipitáty a substituční prvky v tuhém roztoku, tyto deformační mechanismy vedou k významnému zvýšení cyklické pevnosti za vysokých teplot.
Two advanced highly-alloyed austenitic steels based on the Fe-Ni-Cr matrix were studied in conditions of low cycle fatigue both at room and elevated temperature. Extensive set of experimental and characterization tools was used for the investigation of inter-related effects of alloys composition, microstructure, deformation mechanisms and overall material response under load. Key mechanisms and factors determining mechanical properties and performance in the service were analysed and discussed in the relation to the materials design. • Standard fatigue experiments were performed at room temperature and at 700°C. Cyclic hardening/softening curves, cyclic deformation stress-strain curves, Coffin-Manson and Wöhler fatigue life curves were determined. • Various characterization techniques of electron microscopy were used to study changes of the microstructural state of the alloys due to the cyclic loading at room and elevated temperatures. • Fatigue behaviour, strength and cyclic plastic response of studied materials were explained in relation to the microstructure and microstructural aspects of deformation mechanisms both at room and elevated temperatures. • It was found that Sanicro 25 exhibits the highest high temperature strength of all alloys from the same class. Its extraordinary properties are related to the two nanoparticle populations, Cu-rich coherent precipitates and dispersoid-like MX nanoparticles, which play fundamental role in the determination of strength and overall cyclic response. As a result of pinning effects and associated obstacles, dislocation motion in this alloy is significantly retarded preventing formation of substructures with lower stored internal energy. With recovery heavily suppressed, forest dislocation strengthening supported by precipitation and solid solution hardening, leads to the remarkable increase of cyclic strength at elevated temperatures.
Two advanced highly-alloyed austenitic steels based on the Fe-Ni-Cr matrix were studied in conditions of low cycle fatigue both at room and elevated temperature. Extensive set of experimental and characterization tools was used for the investigation of inter-related effects of alloys composition, microstructure, deformation mechanisms and overall material response under load. Key mechanisms and factors determining mechanical properties and performance in the service were analysed and discussed in the relation to the materials design. • Standard fatigue experiments were performed at room temperature and at 700°C. Cyclic hardening/softening curves, cyclic deformation stress-strain curves, Coffin-Manson and Wöhler fatigue life curves were determined. • Various characterization techniques of electron microscopy were used to study changes of the microstructural state of the alloys due to the cyclic loading at room and elevated temperatures. • Fatigue behaviour, strength and cyclic plastic response of studied materials were explained in relation to the microstructure and microstructural aspects of deformation mechanisms both at room and elevated temperatures. • It was found that Sanicro 25 exhibits the highest high temperature strength of all alloys from the same class. Its extraordinary properties are related to the two nanoparticle populations, Cu-rich coherent precipitates and dispersoid-like MX nanoparticles, which play fundamental role in the determination of strength and overall cyclic response. As a result of pinning effects and associated obstacles, dislocation motion in this alloy is significantly retarded preventing formation of substructures with lower stored internal energy. With recovery heavily suppressed, forest dislocation strengthening supported by precipitation and solid solution hardening, leads to the remarkable increase of cyclic strength at elevated temperatures.
Description
Keywords
nízkocyklová únava, cyklické zpevnění, nanočástice, MX, NbC, Cu, austenitická ocel, litá dendritická struktura, deformační mechanismy, únavový život, cyklická odezva, elektronová mikroskopie, HAADF, STEM, difrakce, low cycle fatigue, cyclic strengthening, nanoparticles, MX, NbC, Cu, austenitic steel, cast dendritic structure, deformation mechanisms, fatigue life, cyclic response, electron microscopy, HAADF, STEM, diffraction
Citation
HECZKO, M. High Temperature Deformation Mechanisms [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2018.
Document type
Document version
Date of access to the full text
Language of document
en
Study field
Fyzikální a materiálové inženýrství
Comittee
prof. RNDr. Karel Maca, Dr. (předseda)
Dr. Philipp Spätig (člen)
doc. Ing. Roman Gröger, Ph.D. (člen)
RNDr. Jiří Buršík, CSc. (člen)
doc. Ing. Vít Jan, Ph.D. (člen)
Date of acceptance
2018-12-13
Defence
Obhajoba práce byla vedena v angličtině. Doktorand přednesl stručně výsledky své práce. Komise vznesla několik otázek týkající se náplně této práce a hlavních výsledků, včetně jejich interpretace a významu pro budoucí bádání v této oblasti. Členové komise vysoce hodnotí výjimečnou publikační aktivitu doktoranda a zejména jeho zahraniční stáže v USA a ve Švýcarsku, vč. výsledků dosažených během těchto stáží.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení