Effect of alkaline activator quantity and temperature of curing on the properties of alkali-activated brick dust

Simple item page
dc.contributor.authorBayer, Patrikcs
dc.contributor.authorRovnaníková, Pavlacs
dc.coverage.issue1cs
dc.coverage.volume385cs
dc.date.issued2018-07-16cs
dc.description.abstractThe properties of alkaline activated brick dust mixed with different amounts of water glass with a silicate modulus (M) of 1.0 were studied in connection with the temperature of curing. The influence of the amount of alkaline solution and the temperature of curing on the microstructure and mechanical properties of hardened materials was studied. The flexural and compressive strengths of the hardened products, as well as their microstructure, were determined. Part of the samples was stored under laboratory conditions (20 °C) for 7 and 28 days, other set of samples was stored at 60 °C for 7 and 28 days. One set of samples was treated for 7 days at 60 °C and 21 days at 20 °C. The microstructure of the hardened products was studied by means of porosimetry and scanning electron microscopy.en
dc.description.abstractThe properties of alkaline activated brick dust mixed with different amounts of water glass with a silicate modulus (M) of 1.0 were studied in connection with the temperature of curing. The influence of the amount of alkaline solution and the temperature of curing on the microstructure and mechanical properties of hardened materials was studied. The flexural and compressive strengths of the hardened products, as well as their microstructure, were determined. Part of the samples was stored under laboratory conditions (20 °C) for 7 and 28 days, other set of samples was stored at 60 °C for 7 and 28 days. One set of samples was treated for 7 days at 60 °C and 21 days at 20 °C. The microstructure of the hardened products was studied by means of porosimetry and scanning electron microscopy.en
dc.formattextcs
dc.format.extent1-6cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationIOP Conference Series: Materials Science and Engineering. 2018, vol. 385, issue 1, p. 1-6.en
dc.identifier.doi10.1088/1757-899X/385/1/012004cs
dc.identifier.issn1757-8981cs
dc.identifier.orcid0000-0001-7866-1085cs
dc.identifier.orcid0000-0002-6732-788Xcs
dc.identifier.other148921cs
dc.identifier.researcheridAAF-7443-2019cs
dc.identifier.scopus6506551687cs
dc.identifier.urihttp://hdl.handle.net/11012/137355
dc.language.isoencs
dc.publisherIOP Publishingcs
dc.relation.ispartofIOP Conference Series: Materials Science and Engineeringcs
dc.relation.urihttp://iopscience.iop.org/article/10.1088/1757-899X/385/1/012004cs
dc.rightsCreative Commons Attribution 3.0 Unportedcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1757-8981/cs
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/cs
dc.subjectbrick poweren
dc.subjectalkali-activbationen
dc.subjectwater glassen
dc.subjectmicrostructureen
dc.subjectporosimetryen
dc.subjectstrengthsen
dc.subjectbrick power
dc.subjectalkali-activbation
dc.subjectwater glass
dc.subjectmicrostructure
dc.subjectporosimetry
dc.subjectstrengths
dc.titleEffect of alkaline activator quantity and temperature of curing on the properties of alkali-activated brick dusten
dc.title.alternativeEffect of alkaline activator quantity and temperature of curing on the properties of alkali-activated brick dusten
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-148921en
sync.item.dbtypeVAVen
sync.item.insts2025.10.14 14:15:09en
sync.item.modts2025.10.14 10:28:28en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav chemiecs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Bayer_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012004.pdf
Size:
3.88 MB
Format:
Adobe Portable Document Format
Description:
Bayer_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012004.pdf
Download
Collections
Ústav chemie