Zařízení pro ovládání mikroposuvu
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Předkládaná práce analyzuje funkci konkrétního typu mikroposuvu za účelem navrhnout a sestavit elektronické zařízení vhodné k ovládání pohybu jezdce mikroposuvu. V souladu s dokumentací je zde uveden popis řídících signálů a možností jejich generování s ohledem na výslednou přesnost pohybu jezdce. Hlavním zaměřením práce je popis elektronické jednotky od napájecího zdroje, přes řídící mikroprocesorovou část, až po koncový stupeň, na který se přímo připojuje mikroposuv. Součástí je i programové vybavení pro mikrokontrolér a počítač, popis komunikace, měření a kalibrace pohybu a návrh na uzavření regulační smyčky pro další zvýšení přesnosti pohybu.
Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.
Presented thesis analyses a function of the particular type of the nanopositioner with aim to suggest and construct an electronic device suitable for control of the nanopositioner slider. In presented material there is a description of the control signals and possibility of their generating in the respect of slider movement accuracy. The main goal of the thesis is to describe electronic units ranging from power supply, control processor unit part to end part that directly joint nanopositioner. There is also programme equipment for microcontroller and computer, communication description, movement measuring and calibration and draft for the close-up of the control loop for additional increase of the movement accuracy.
Description
Citation
KOKEŠ, O. Zařízení pro ovládání mikroposuvu [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2010.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Mikroelektronika
Comittee
prof. Ing. Vladislav Musil, CSc. (předseda)
doc. Ing. Ladislav Hulényi, CSc. (místopředseda)
prof. Ing. Jaroslav Boušek, CSc. (člen)
Ing. Jan Prášek, Ph.D. (člen)
Ing. Jiří Špinka (člen)
Date of acceptance
2010-06-08
Defence
Student Bc. Ondřej Kokeš seznámil komisi se svoji diplomovou prací na téma: Zařízení pro ovládání mikroposuvu.
Odpověděl na otázky oponenta - 1.) Zadání se nezabývá otázkou konkrétního možného použití navrhovaného zařízení a tedy ani autor práce se o možném použití nezmiňuje. Mohl by autor uvést alespoň jeden příklad očekávaného použití vytvořeného zařízení.
2.) Lze odvodit od průběhu a počtu impulzů polohu posuvné části?
Dále proběhla krátká rozprava k tématu diplomové práce.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení