Otočný sloupový jeřáb plnícího vozu koksárenské baterie
Loading...
Date
Authors
Hurník, Štěpán
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato diplomová práce se zabývá návrhem řešení otočného sloupového jeřábu plnícího vozu koksárenské baterie, který slouží k práci s kusovými břemeny, opravám a údržbě plnícího vozu a čištění stoupaček baterie. V první části této práce byla zvolena daná koncepce řešení. U této koncepce byla navrhnuta hlavní ocelová konstrukce jeřábu, která byla následně zkontrolována pevnostní analýzou pomocí MKP programu I-DEAS NX 11. Dále byl s využitím zadaných parametrů uskutečněn výpočtový návrh hlavních součásti zdvihového a pojezdového mechanismu. Závěrem této práce je uvedeno shrnutí výsledků zadaných cílů. Přílohu této práce tvoří výkres celkové sestavy jeřábu.
This master´s thesis deals with a proposed design of the derrick of the filling car of a coke-oven battery, which is used for working with unit loads, repairing and maintenance of the filling car and cleaning of the battery risers. In the first part a solution concept was chosen. For this concept a main steel structure was designed, which was controlled in stress analysis by the FEM program I-DEAS NX 11. Further, the main parts of the lifting and travelling mechanism were calculated using specified parameters. In the conclusion of this thesis the results summary of specified targets is stated. Assembly drawing is in the annex of this thesis.
This master´s thesis deals with a proposed design of the derrick of the filling car of a coke-oven battery, which is used for working with unit loads, repairing and maintenance of the filling car and cleaning of the battery risers. In the first part a solution concept was chosen. For this concept a main steel structure was designed, which was controlled in stress analysis by the FEM program I-DEAS NX 11. Further, the main parts of the lifting and travelling mechanism were calculated using specified parameters. In the conclusion of this thesis the results summary of specified targets is stated. Assembly drawing is in the annex of this thesis.
Description
Citation
HURNÍK, Š. Otočný sloupový jeřáb plnícího vozu koksárenské baterie [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2011.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Automobilní a dopravní inženýrství
Comittee
prof. Ing. Miroslav Rousek, CSc. (předseda)
doc. Ing. Miroslav Škopán, CSc. (místopředseda)
doc. Ing. Břetislav Mynář, CSc. (člen)
doc. Ing. Jiří Malášek, Ph.D. (člen)
Ing. Emil Machač (člen)
Date of acceptance
2011-06-13
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení