High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators

A high-selectivity bandpass filter (BPF) based on two merged ring resonators is presented in this paper. The structure of this proposed BPF can be seen as the two one-wavelength ring resonators merged each other by sharing the common λg/2 microstrip line. Due to symmetric structure, it can be analyzed by even- and odd-mode method and the locations of six transmission zeros are calculated using input impedance deductions. For further demonstration, a BPF example centered at 2 GHz is fabricated with high frequency selectivity. The measured 3-dB fractional bandwidth is 11% (1.89-2.11 GHz) and insertion loss is less than 2 dB in the passband. Good agreement between simulation and measurement verifies the feasibility of the design method.

Keywords

Bandpass filter, coupled-line structures, high selectivity, transmission zeros

Citation

Radioengineering. 2021 vol. 30, č. 3, s. 504-509. ISSN 1210-2512
https://www.radioeng.cz/fulltexts/2021/21_03_0504_0509.pdf

Document type

Peer-reviewed

Document version

Published version

Language of document

en

Document licence

Creative Commons Attribution 4.0 International license
http://creativecommons.org/licenses/by/4.0/