Montážní hala proudových letounů s administrativou
Loading...
Date
Authors
Fogl, Martin
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Úkolem této diplomové práce je navrhnout novostavbu montážní haly proudových letounů včetně třípodlažní administrativní budovy s částečným podsklepením a zpracovat projektovou dokumentaci pro fázi provedení stavby. Stavební objekt je osazen na rovném terénu v průmyslovém areálu s neveřejným letištěm nedaleko obce Odolena voda v okrese Praha – Východ. Návrh respektuje okolní zástavbu a veškeré závazné dokumenty, zejména pak územní plán obce a regulační plochy letiště. Prostory montáže jsou dispozičně, rozděleny na tři části, kde probíhají jednotlivé pracovní úkony při sestavování trupů letadel, a to na pracoviště kompletace, lepení překrytů a nabíjení katapultážích sedaček. Budova administrativní je vyčleněna na prostory zázemí zaměstnanců ve výrobě, multifunkční místnost se showroomem, zázemí technologie budovy, kancelářské plochy a příprava jídel s jídelnou. Budova jako celek svými dispozičními i materiálovými proporcemi koresponduje s aktuálními trendy ve stavebnictví. Pro firmu CC-Aircraft a. s. bude tato stavba nejen novou centrálou vedení, vývoje a výroby, ale i vizitkou pro nové zákazníky. Založení na velkoprůměrových pilotách zaručuje spolehlivý systém přenášení statických a dynamických zatížení do únosných půdních vrstev. Nosný skeletový konstrukční systém z prefabrikovaných železobetonových prvků zajistí rychlou a efektivní výstavbu. Společně s lehkým opláštěním systémovými tepelně izolačními panely nebo provětrávanou fasádou s pórobetonovým výplňovým zdivem a jednoplášťovou vegetační střechou snižují energetickou náročnost budovy a vytvářejí maximální tepelný komfort uvnitř.
The task of this thesis is to design a new jet aircraft assembly hall including a three-storey administrative building with a partial basement and to prepare project documentation for the construction phase. The building is located on flat terrain in an industrial area with a non-public airport near the village of Odolena voda in the Prague – East district. The design respects the surrounding development and all binding documents, in particular the municipality's master plan and the airport's regulatory areas. The assembly areas are divided into three parts, where the individual work operations during the assembly of the aircraft fuselages take place, namely the assembly workplace, gluing of overlays and charging of ejection seats. The administration building is divided into areas for production staff facilities, a multifunctional room with a showroom, building technology facilities, office areas and food preparation with a canteen. The building as a whole corresponds to the current trends in construction with its layout and material proportions. For CC-Aircraft a. s. this construction will not only be a new headquarters for management, development and production, but also a business card for new customers. The foundation on large-diameter piles guarantees a reliable system for transferring static and dynamic loads to the load-bearing soil layers. The load-bearing skeletal structural system of precast reinforced concrete elements ensures fast and efficient construction. Together with lightweight cladding with system thermal insulation panels or a ventilated facade with aerated aerated concrete infill masonry and a single-skin vegetated roof, they reduce the energy consumption of the building and create maximum thermal comfort inside.
The task of this thesis is to design a new jet aircraft assembly hall including a three-storey administrative building with a partial basement and to prepare project documentation for the construction phase. The building is located on flat terrain in an industrial area with a non-public airport near the village of Odolena voda in the Prague – East district. The design respects the surrounding development and all binding documents, in particular the municipality's master plan and the airport's regulatory areas. The assembly areas are divided into three parts, where the individual work operations during the assembly of the aircraft fuselages take place, namely the assembly workplace, gluing of overlays and charging of ejection seats. The administration building is divided into areas for production staff facilities, a multifunctional room with a showroom, building technology facilities, office areas and food preparation with a canteen. The building as a whole corresponds to the current trends in construction with its layout and material proportions. For CC-Aircraft a. s. this construction will not only be a new headquarters for management, development and production, but also a business card for new customers. The foundation on large-diameter piles guarantees a reliable system for transferring static and dynamic loads to the load-bearing soil layers. The load-bearing skeletal structural system of precast reinforced concrete elements ensures fast and efficient construction. Together with lightweight cladding with system thermal insulation panels or a ventilated facade with aerated aerated concrete infill masonry and a single-skin vegetated roof, they reduce the energy consumption of the building and create maximum thermal comfort inside.
Description
Keywords
Montážní hala, administrativní budova, vegetační střecha, provětrávaná fasáda, systémové tepelně izolační panely, plochá střecha, železobetonový prefabrikovaný skelet, letiště, částečné podsklepení, proudové letouny, mostový jeřáb, vláknocementové desky., Assembly hall, office building, vegetated roof, ventilated facade, system thermal insulation panels, flat roof, reinforced concrete prefabricated skeleton, airport, partial basement, jet aircraft, overhead crane, fibre cement slabs.
Citation
FOGL, M. Montážní hala proudových letounů s administrativou [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Miloš Lavický, Ph.D. (místopředseda)
Ing. Marie Rusinová, Ph.D. (člen)
Ing. Tereza Bečkovská, Ph.D. (člen)
Ing. Jan Vystrčil, Ph.D. (člen)
Ing. Pavel Uher, Ph.D. (člen)
Ing. Michal Požár, Ph.D. (člen)
Ing. et Ing. Jakub Dohnal, Ph.D. (člen)
doc. Ing. arch. Milan Palko, Ph.D. (předseda)
Date of acceptance
2024-01-30
Defence
Student představil svou práci Montážní hala proudových letounů s administrativou, pomocí PowerPoint prezentace. Během obhajoby práce uvedl:
- Typ objektu a základní charakteristika,
- Lokalita stavby, umístění stavby,
- Konstrukční řešení stavby,
- Materiálové řešení stavby,
- Řez administrativní budovou,
- Dispoziční řešení,
- Sestava prefa dílců NP
- Konstrukce střešních plášťů,
- Vizualizace stavby,
Student dále objasnil a zodpověděl dotazy a připomínky oponenta práce.
Student s dokonalým přehledem zaujímal odborná stanoviska ke všem připomínkám oponenta a výborně reagoval i na všechny otázky členů komise, které byly k obhajované práci položeny.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení