Termoelektrický generátor pro zplyňovací kotel

Loading...
Thumbnail Image
Date
Authors
Kováč, Samuel
ORCID
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
With growing demands for the full use of the heat that is produced, the effort to use waste heat is also growing. One of the ways to use such heat is the direct conversion of thermal energy into electrical energy. A device called a thermoelectric generator (TEG) is used for this purpose. Nowadays, they are in a rather still developing part of their existence. The limiting factor is the efficiency of the thermoelectric materials known so far. Nevertheless, this technology finds its uses in practice. This work deals with the basic principles of thermoelectric conversion, the materials discovered so far, their efficiency and, last but not least, the application of TEG in a gasification boiler for lump wood. The main idea of the project, carried out in cooperation between BUT and Ecoscroll, is the development of a combustion device that could function without a permanent connection to the electrical network, or the optimization of the electrical input of such a device. The gasification boiler is chosen for the reason that, by its very nature, it requires low electrical power.
gassification boiler, thermoelectric generator, CFD, TEG, Thermoelctric materials
Description
Citation
KOVÁČ, S. Termoelektrický generátor pro zplyňovací kotel [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Dr. Ing. Marcus Reppich (předseda) prof. Ing. Petr Stehlík, CSc., dr. h. c. (místopředseda) doc. Ing. Jaroslav Jícha, CSc. (člen) prof. Ing. Zdeněk Jegla, Ph.D. (člen) doc. Ing. Martin Pavlas, Ph.D. (člen) doc. Ing. Vojtěch Turek, Ph.D. (člen) Ing. Pavel Skryja, Ph.D. (člen) Ing. Pavel Lošák, Ph.D. (člen)
Date of acceptance
2024-06-11
Defence
Student odprezentoval DP na téma Termoelektrický generátor pro zplyňovací kotel. Po prezentaci student zodpověděl otázky oponenta a v navazující diskuzi otázky k diplomové práci otázky položené členy komise. Dotaz k vysvětlení průběhu zkoušky, který byl uvedený v prezentaci. Byl zodpovězen. Dotaz: Kolik paliva je průměrně spotřebováno při kontinuálním provozu? Jak byste spotřebu paliva vypočítal? Dotaz byl zodpovězen Dotaz: Jaké emise se u zplyňovacího kotle sledují? Byl zodpovězen. Dotaz: Znáte emisní limity pro tento kotel? Nebyl zodpovězen. Dotaz: Jakým způsobem zajistíte napájení kotle elektřinou pokud bude studený? Byl částečně zodpovězen. Dotaz: Jakým způsobem byla určena směrodatná odchylka na snímku č. 14? Byl zodpovězen. Dotaz: Ve spalovacích rovnicích uvádíte CH4 (metan), kde se v kotli vezme? Byl částečně zodpovězen.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení
DOI
Collections
Citace PRO