Triggerovací jednotka pro sběrnici CAN
Loading...
Date
Authors
Piroch, Vojtěch
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato bakalářská práce se zabývá návrhem triggerovací jednotky pro sběrnici CAN, která umožňuje připojení na triggerovací vstup osciloskopu a zobrazení signálových průběhů rámců sběrnice CAN. První část práce se zaobírá teoretickým popisem samotné sběrnice CAN, jejím principem fungování, popisem rámců atd. Druhá část práce pojednává o výběru stěžejních součástek potřebných pro zapojení, návrhu finálního schématu, definování a výpočtu jednotlivých součástek v obvodu a způsobu ovládání. Třetí část je praktická, zabývá se testováním prototypu zařízení, návrhem plošného spoje a obalu pro zařízení. Následující úsek charakterizuje softwarovou část zařízení, konkrétně způsob, jak ovládat zařízení, popis programu a knihoven použitých při programování mikrokontroleru. Poslední část popisuje finální testování a měření parametrů, jako jsou jitter a zpoždění triggerovacího pulzu.
This bachelor thesis deals with the design of a triggering device for the CAN bus that allows connection to the trigger input of an oscilloscope and display of the signal waveforms of the CAN bus frames. The first part of the thesis deals with the theoretical description of the CAN bus itself, its principle of operation, description of frames, etc. The second part of the thesis deals with the selection of the core components needed for the circuit, the design of the final schematic, the definition and calculation of the individual components in the circuit and the method of control. The third part is practical, it is dealing with testing the prototype device, designing the circuit board and packaging for the device. The following section describes the software part of the device, specifically how to control the device, a description of the program and libraries used in programming the microcontroller. The last section describes the final testing and measurement of parameters such as jitter and trigger pulse delay.
This bachelor thesis deals with the design of a triggering device for the CAN bus that allows connection to the trigger input of an oscilloscope and display of the signal waveforms of the CAN bus frames. The first part of the thesis deals with the theoretical description of the CAN bus itself, its principle of operation, description of frames, etc. The second part of the thesis deals with the selection of the core components needed for the circuit, the design of the final schematic, the definition and calculation of the individual components in the circuit and the method of control. The third part is practical, it is dealing with testing the prototype device, designing the circuit board and packaging for the device. The following section describes the software part of the device, specifically how to control the device, a description of the program and libraries used in programming the microcontroller. The last section describes the final testing and measurement of parameters such as jitter and trigger pulse delay.
Description
Citation
PIROCH, V. Triggerovací jednotka pro sběrnici CAN [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Radovan Hájovský, Ph.D. (předseda)
doc. Ing. Zdeněk Bradáč, Ph.D. (místopředseda)
Ing. František Burian, Ph.D. (člen)
Ing. Martin Čala, Ph.D. (člen)
Ing. Jan Kunz, Ph.D. (člen)
Ing. Lukáš Pohl, Ph.D. (člen)
Date of acceptance
2023-06-13
Defence
Student obhájil bakalářskou práci. Komise neměla žádné další námitky k řešené práci. V průběhu odborné rozpravy odpověděl na dotazy oponenta.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení