Bezdrátová nabíječka podle standardu NFC Forum WLC 2.0
Loading...
Date
Authors
Rada, Vojtěch
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato diplomová práce je zaměřena na technologii bezdrátového nabíjení podle standardu Wireless Charging 2.0 od standardizační organizace NFC Forum a na návrh obvodu ASIC pro zařízení ve funkci přijímače, kdy je největší důraz kladen na návrh digitální části daného obvodu. V úvodu se práce zabývá obecnou teorií, kde jsou postupně probrány všechny normy od společnosti NFC Forum potřebné pro návrh řízení kontrolního protokolu podle standardu Wireless Charging 2.0. Následně je provedena analýza reálné komunikace vývojové sady určené pro tento standard, na jejímž základě je proveden systémový návrh digitálního obvodu. Navržený obvod je poté popsán pomocí jazyka VHDL a následně je simulacemi ověřena základní funkčnost jednotlivých bloků. V závěru práce je zhotoven prototypový modul s navrženým systémem, který je implementován do obvodu FPGA s připojeným nabíjecím obvodem a jehož funkcionalita je poté otestována v praxi.
This diploma thesis is focused on wireless charging technology according to the Wireless Charing 2.0 standard by the NFC Forum and the design of an ASIC circuit of a device functioning as a listener, where the primary emphasis is placed on the digital design of this circuit. In the beginning the work deals with a general theory, gradually discussing all the standards from the NFC Forum that are necessary for the control protocol design according to the Wireless Charging 2.0. Subsequently, the analysis of a real communication in the development kit for this standard is conducted, based on which the system design of the digital circuit is made. The designed circuit is described by VHDL language and verified by running the basic simulations to check the functionality of the designed parts of the circuit. In the final part of the thesis, a prototype module with the proposed system is fabricated, implemented in an FPGA with a connected battery charger circuit and its functionality is tested in practice.
This diploma thesis is focused on wireless charging technology according to the Wireless Charing 2.0 standard by the NFC Forum and the design of an ASIC circuit of a device functioning as a listener, where the primary emphasis is placed on the digital design of this circuit. In the beginning the work deals with a general theory, gradually discussing all the standards from the NFC Forum that are necessary for the control protocol design according to the Wireless Charging 2.0. Subsequently, the analysis of a real communication in the development kit for this standard is conducted, based on which the system design of the digital circuit is made. The designed circuit is described by VHDL language and verified by running the basic simulations to check the functionality of the designed parts of the circuit. In the final part of the thesis, a prototype module with the proposed system is fabricated, implemented in an FPGA with a connected battery charger circuit and its functionality is tested in practice.
Description
Keywords
Komunikace na blízkou vzdálenost, bezdrátové nabíjení, číslicový návrh, přijímač, vysílač, kontrolní protokol, výměna dat, tag, systémový návrh, digitální obvod, simulace, FPGA, Near Field Communication, wireless charging, digital design, listener, poller, control protocol, data exchange, tag, system design, digital circuit, simulation, FPGA
Citation
RADA, V. Bezdrátová nabíječka podle standardu NFC Forum WLC 2.0 [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Lukáš Fujcik, Ph.D. (předseda)
doc. Ing. František Urban, CSc. (místopředseda)
doc. Ing. Roman Šotner, Ph.D. (člen)
Ing. Jan Prášek, Ph.D. (člen)
Ing. Roman Prokop, Ph.D. (člen)
Date of acceptance
2024-06-05
Defence
Studentka seznámila státní zkušební komisi s cíli a řešením závěrečné vysokoškolské práce a zodpověděla otázky a připomínky oponenta. Student dále odpověděl na otázky komise: Jak jste se v rámci práce přiblížil k návrhu obvodu ASIC? Vycházel jste z již hotového návrhu? Jaký je rozdíl ve vašem návrhu pro FPGA a ASIC?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení