An Evaluation of On-Tool System for Sanding Dust Collection: Pilot Study

Simple item page
dc.contributor.authorDado, Miroslavcs
dc.contributor.authorLamperová, Annacs
dc.contributor.authorKotek, Lubošcs
dc.contributor.authorHnilica, Richardcs
dc.coverage.issue3cs
dc.coverage.volume28cs
dc.date.accessioned2021-04-29T10:54:28Z
dc.date.available2021-04-29T10:54:28Z
dc.date.issued2020-09-30cs
dc.description.abstractHazards identification is essential step in framework of occupational health & safety (OH&S) management system. The task of spruce wood sanding with hand-held power belt sander is considered as a significant resource of exposure to wood dust. Dust from spruce wood is hazard that can cause negative health effects such as asthma and chronic bronchitis. A dust collection box is a commonly used technical measure for reducing exposure to wood dust for this task in practice. The objective of this pilot study was to evaluate the effectiveness of commercially available dust collection box at reducing exposure to wood dust during the task of sanding spruce wood using hand-held power belt sander. Laboratory experiment involved sanding spruce planks (250 mm x 50 mm x 500 mm) in longitudinal direction using belt sander (Bosch, PBS 75 A) with 120 grit sanding belt. Spruce dust mass concentrations were sampled using an aerosol monitor (TSI Inc., DustTrak DRX 8533) in the breathing zone of operator. Inhalable and respirable dust concentrations were both significantly lower (P < 0.0001) when dust box was attached to belt sander compared with sander without a dust box. Results from this pilot study indicate that dust collection box is efficient technical measure for decreasing exposure to aerosol mass concentration during sanding spruce wood with hand-held belt sander.en
dc.formattextcs
dc.format.extent184-188cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationManagement Systems in Production Engineering. 2020, vol. 28, issue 3, p. 184-188.en
dc.identifier.doi10.2478/mspe-2020-0027cs
dc.identifier.issn2450-5781cs
dc.identifier.other170064cs
dc.identifier.urihttp://hdl.handle.net/11012/196593
dc.language.isoencs
dc.publisherWalter de Gruytercs
dc.relation.ispartofManagement Systems in Production Engineeringcs
dc.relation.urihttp://sciendo.com/article/10.2478/mspe-2020-0027cs
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2450-5781/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/cs
dc.subjectbelt sanderen
dc.subjectdust extractionen
dc.subjectefficiencyen
dc.titleAn Evaluation of On-Tool System for Sanding Dust Collection: Pilot Studyen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-170064en
sync.item.dbtypeVAVen
sync.item.insts2021.04.29 12:54:28en
sync.item.modts2021.04.29 12:14:37en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav výrobních strojů, systémů a robotikycs
thesis.grantorVysoké učení technické v Brně. . Technická univerzita vo Zvoleněcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
10.2478_mspe20200027.pdf
Size:
665.17 KB
Format:
Adobe Portable Document Format
Description:
10.2478_mspe20200027.pdf
Download
Collections
Ústav výrobních strojů, systémů a robotiky