Trojlodní objekt pro průmyslovou výrobu.
Loading...
Date
Authors
Lečbych, Antonín
ORCID
Advisor
Referee
Mark
E
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Diplomová práce se zabývá návrhem a posouzením trojtraktní haly pro drobnou zámečnickou výrobu. Nosné rozpětí konstrukce haly je 9, 18 a 9 m. V prostřední lodi je mostový jeřáb o nosnosti 2t. Předpokládaná lokalita objektu jsou Luhačovice. Prvotní koncept konstrukce byl zadán vedoucím práce (jakožto představa investora/architekta) pro který bylo zpracováno statické a konstrukční řešení s detaily. Pro vybranou variantu je vypracovaný podrobný statický výpočet nosné konstrukce a určených detailů. Celkové půdorysné rozměry objektu jsou 36 x 36 m a výška hřebene je 9 m. Konstrukce střední lodi je ocelová a boční přístavky jsou z lepeného lamelového dřeva.
The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.
The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.
Description
Keywords
Nosná dřevěná konstrukce, halová stavba, statický návrh, konstrukční návrh, ocelová konstrukce, dřevěné vaznice, táhlo, šroubový spoj, prutový model, jeřábová dráha, lepené lamelové dřevo, Timber load bearing structure, hall construction, calculation design, construction design, steel structure, wooden purlin, rod, bolted joint, bar model, bridge crane, glued laminated timber
Citation
LEČBYCH, A. Trojlodní objekt pro průmyslovou výrobu. [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2015.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Pozemní stavby
Comittee
Date of acceptance
2015-02-04
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení