Crack Propagation Analysis of Compression Loaded Rolling Elements

Simple item page
dc.contributor.authorDlhý, Pavolcs
dc.contributor.authorPoduška, Jancs
dc.contributor.authorBerer, Michaelcs
dc.contributor.authorGosch, Anjacs
dc.contributor.authorSlávik, Ondrejcs
dc.contributor.authorNáhlík, Lubošcs
dc.contributor.authorHutař, Pavelcs
dc.coverage.issue10cs
dc.coverage.volume14cs
dc.date.issued2021-05-01cs
dc.description.abstractThe problem of crack propagation from internal defects in thermoplastic cylindrical bearing elements is addressed in this paper. The crack propagation in these elements takes place under mixed-mode conditions-i.e., all three possible loading modes (tensile opening mode I and shear opening modes II and III) of the crack are combined together. Moreover, their mutual relation changes during the rotation of the element. The dependency of the stress intensity factors on the crack length was described by general parametric equations. The model was then modified by adding a void to simulate the presence of a manufacturing defect. It was found that the influence of the void on the stress intensity factor values is quite high, but it fades with crack propagating further from the void. The effect of the friction between the crack faces was find negligible on stress intensity factor values. The results presented in this paper can be directly used for the calculation of bearing elements lifetime without complicated finite element simulations.en
dc.formattextcs
dc.format.extent2656-1-2656-24cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationMaterials . 2021, vol. 14, issue 10, p. 2656-1-2656-24.en
dc.identifier.doi10.3390/ma14102656cs
dc.identifier.issn1996-1944cs
dc.identifier.orcid0000-0002-1556-6109cs
dc.identifier.orcid0000-0002-1570-2705cs
dc.identifier.orcid0000-0003-3827-5408cs
dc.identifier.other172924cs
dc.identifier.researcheridF-2237-2018cs
dc.identifier.researcheridA-6475-2009cs
dc.identifier.researcheridB-2957-2009cs
dc.identifier.scopus57203819835cs
dc.identifier.scopus22635754000cs
dc.identifier.scopus22634557800cs
dc.identifier.urihttp://hdl.handle.net/11012/202261
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofMaterialscs
dc.relation.urihttps://www.mdpi.com/1996-1944/14/10/2656cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1996-1944/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectfracture mechanicsen
dc.subjectcrack propagationen
dc.subjectstress intensity factoren
dc.subjectthermoplastic materialen
dc.subjectbearing elementen
dc.subjectfinite element methoden
dc.titleCrack Propagation Analysis of Compression Loaded Rolling Elementsen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-172924en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:49:14en
sync.item.modts2025.01.17 16:42:10en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav mechaniky těles, mechatroniky a biomechanikycs
thesis.grantorVysoké učení technické v Brně. Středoevropský technologický institut VUT. Středoevropský technologický institut VUTcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
materials1402656.pdf
Size:
11.2 MB
Format:
Adobe Portable Document Format
Description:
materials1402656.pdf
Download
Collections
Ústav mechaniky těles, mechatroniky a biomechaniky
Středoevropský technologický institut VUT