Vybrané problémy konstrukcí podporovaných kabely.

but.committeeprof. Ing. Miroslav Vořechovský, Ph.D. (předseda) prof. Ing. Jaroslav Halvoník, Ph.D. (člen) doc. Ing. Lumír Miča, Ph.D. (člen) doc. Ing. Radim Nečas, Ph.D. (člen) prof. Ing. Pavel Schmid, Ph.D. (člen) Ing. Leonard Šopík, Ph.D. (člen) prof. Dr.techn. Ing. Michal Varaus (člen) prof. Ing. Jan Vítek, CSc. (člen)cs
but.jazykčeština (Czech)
but.programKonstrukce a dopravní stavbycs
but.resultpráce byla úspěšně obhájenacs
dc.contributor.advisorStráský, Jiřícs
dc.contributor.authorVelešík, Marekcs
dc.contributor.refereeHalvoník, Jaroslavcs
dc.contributor.refereeVítek, Jancs
dc.date.accessioned2025-06-19T04:01:54Z
dc.date.available2025-06-19T04:01:54Z
dc.date.created2025cs
dc.description.abstractV předložené disertační práci jsou prezentovány vybrané problémy spjaté s návrhem, optimalizací a vývojem. Předmětem zájmu jsou konstrukce, u kterých kabel plní hlavní nosnou funkci (visuté konstrukce a předpjaté pásy), anebo funkci stabilizační (obloukové konstrukce). Teoretická část práce se zaměřuje na optimalizaci návrhu předpjatých pásů prostřednictvím vhodné volby geometrie vnějších předpínacích lan. Vliv změny trasování předpětí na efektivitu návrhu z hlediska statického a dynamického chování je zkoumáno prostřednictvím statické studie. Experimentální část práce se soustředí na segmentové visuté konstrukce, které jsou široce využívány v případech, kdy není použit samokotvený systém. Betonová spára mezi prefabrikovanými segmenty je zdrojem diskontinuit a její správný návrh je rozhodující z hlediska životnosti celé konstrukce. V práci jsou porovnány výsledky z prutové a stěnové analýzy s výsledky měření získaných z experimentálních zkoušek výseku části konstrukce. Výsledky analýzy lze dále využít při návrhu předpjatého pásu a visutých konstrukcí. Poslední část práce se zabývá návrhem přímopochozího oblouku, který společně s předpínacím lanem situovaným pod mostovkou tvoří samokotvený systém. Přímopochozí obloukové konstrukce lze s ohledem na nutnost zachytit značné horizontální síly realizovat pouze ve vhodných základových poměrech a do určitých rozpětí. Vhodným doplněním vnějších předpínacích kabelů můžeme horizontální reakce značně redukovat. V práci je představena parametrická studie vzepětí vnějšího kabelu, z níž vzešlo inovativní geometrické uspořádání obloukové samokotvené konstrukce. Pro konstrukci vybranou dle výsledků studie byly ověřeny výpočtové předpoklady experimentálním měřením respektujícím pravidla modelové podobnosti.cs
dc.description.abstractCable-supported structures enable the design of efficient and statically clear structures. Their development is aligned with the development of civil engineering and the design itself provides a series of engineering problems to be addressed. In the thesis chosen problems related to design, optimization and development are presented. The thesis is focused on structures where cable has either the bearing function (suspended structures and stress ribbon structures) or a stabilizing function (arch structures). The theoretical part of the thesis is focused on design optimization of stress ribbon structures through the optimal geometry of the external prestressing cables. The behaviour of the structure in the static study is examined also in terms of the dynamic response of the structure. The experimental part of the thesis is focused on suspension structures assembled from precast segments, which are commonly used in cases where a self-anchored system is not designed. The concrete joints are regions of discontinuities and their design is critical for the durability in service life of the structure. In this thesis, the results from the several numerical analyses of the joints were compared with the results obtained from experimental measurements. The results of the analysis can be further used in the design of suspension structures and stress ribbon structures. The last part of the thesis deals with the design of the directly walkable arch, which together with the external prestressing tendons forms a self-anchored system. External prestressing tendons are situated under the bridge deck. Directly walkable arches can be designed only in good geological conditions and within certain spans due to significant horizontal forces. Horizontal reactions can be considerably reduced by external prestressing cables. In this thesis, a parametric study of cable arrangement is presented, leading to design of an innovative self-anchored arch structure. The hypotheses for design of chosen structure were verified by a model test respecting the model analogy principles.en
dc.description.markPcs
dc.identifier.citationVELEŠÍK, M. Vybrané problémy konstrukcí podporovaných kabely. [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2025.cs
dc.identifier.other167034cs
dc.identifier.urihttps://hdl.handle.net/11012/254246
dc.language.isocscs
dc.publisherVysoké učení technické v Brně. Fakulta stavebnícs
dc.rightsStandardní licenční smlouva - přístup k plnému textu bez omezenícs
dc.subjectVisutá konstrukcecs
dc.subjectpředpjatý páscs
dc.subjectplochý obloukcs
dc.subjectsamokotvený systémcs
dc.subjectprefabrikované segmentycs
dc.subjectspárycs
dc.subjectnelineární statická analýzacs
dc.subjectdynamická analýzacs
dc.subjectfyzikální modelcs
dc.subjectmodelová podobnostcs
dc.subjectzatěžovací zkouškacs
dc.subjectSuspension structureen
dc.subjectStress ribbon structureen
dc.subjectFlat archen
dc.subjectself-anchored systemen
dc.subjectprecast segmentsen
dc.subjectjointsen
dc.subjectnonlinear static analysisen
dc.subjectdynamic analysisen
dc.subjectmodel testen
dc.subjectmodel analogyen
dc.subjectload testen
dc.titleVybrané problémy konstrukcí podporovaných kabely.cs
dc.title.alternativeSelected Problems of Cable Supported Structuresen
dc.typeTextcs
dc.type.driverdoctoralThesisen
dc.type.evskpdizertační prácecs
dcterms.dateAccepted2025-05-22cs
dcterms.modified2025-06-18-14:20:29cs
eprints.affiliatedInstitution.facultyFakulta stavebnícs
sync.item.dbid167034en
sync.item.dbtypeZPen
sync.item.insts2025.06.19 06:01:54en
sync.item.modts2025.06.19 05:41:48en
thesis.disciplinebez specializacecs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav betonových a zděných konstrukcícs
thesis.levelDoktorskýcs
thesis.namePh.D.cs
Files
Original bundle
Now showing 1 - 5 of 6
Loading...
Thumbnail Image
Name:
final-thesis.pdf
Size:
19.79 MB
Format:
Adobe Portable Document Format
Description:
file final-thesis.pdf
Loading...
Thumbnail Image
Name:
appendix-1.pdf
Size:
161.35 KB
Format:
Adobe Portable Document Format
Description:
file appendix-1.pdf
Loading...
Thumbnail Image
Name:
thesis-1.pdf
Size:
2.86 MB
Format:
Adobe Portable Document Format
Description:
file thesis-1.pdf
Loading...
Thumbnail Image
Name:
Posudek-Vedouci prace-Stanovisko skolitele doktoranda k disertacni praci.pdf
Size:
761.08 KB
Format:
Adobe Portable Document Format
Description:
file Posudek-Vedouci prace-Stanovisko skolitele doktoranda k disertacni praci.pdf
Loading...
Thumbnail Image
Name:
Posudek-Oponent prace-POSUDEK Valesik_Halvonik.pdf
Size:
573.36 KB
Format:
Adobe Portable Document Format
Description:
file Posudek-Oponent prace-POSUDEK Valesik_Halvonik.pdf
Collections