Soustava Fabry-Perotova a Michelsonova interferometru pro měření délek s femtosekundovým laserem
but.committee | prof. RNDr. Tomáš Šikola, CSc. (předseda) prof. RNDr. Miroslav Liška, DrSc. (místopředseda) prof. RNDr. Bohumila Lencová, CSc. (člen) doc. RNDr. Josef Kuběna, CSc. (člen) prof. RNDr. Jiří Komrska, CSc. (člen) prof. RNDr. Pavel Zemánek, Ph.D. (člen) prof. RNDr. Petr Dub, CSc. (člen) prof. RNDr. Radim Chmelík, Ph.D. (člen) prof. Ing. Ivan Křupka, Ph.D. (člen) prof. RNDr. Jiří Spousta, Ph.D. (člen) RNDr. Antonín Fejfar, CSc. (člen) | cs |
but.jazyk | čeština (Czech) | |
but.program | Aplikované vědy v inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Číp, Ondřej | cs |
dc.contributor.author | Vémola, Tomáš | cs |
dc.contributor.referee | Liška, Miroslav | cs |
dc.date.created | 2011 | cs |
dc.description.abstract | Tato práce se zabývá návrhem komparačního interferometru. Jedná se o soustavu dvou interferometrů, Michelsonova a Fabryho-Pérotova. Účelem této sestavy je vzájemně po- rovnat výsledky délkových měření těchto interferometrů. V teoretické části jsou popsány principy měření s Michelsonovým a Fabryho-Pérotovým interferometrem. Zvláštní po- zornost je věnována inovativní metodě interferometrických měření s laditelnými lasery a optickým frekvenčním hřebenem. V praktické části je popsána tzv. pilotní sestava. Jedná se o prototyp, který sloužil k základním experimentům pro porovnání obou výše zmíněných metod. Na základě výsledků měření a zkušeností s touto sestavou pak byla navržena definitivní sestava ve formě samostatného přístroje. | cs |
dc.description.abstract | The thesis deals with a design of a comparing interferometer. It concerns a setup of two interferometers, one of them is a Michelson and another a Fabry-Pérot type. This set-up is made to compare results of length measurements simultaneously performed by each of them. In the Theory, basic principles of Michelson and Fabry-Pérot interferometers are described. A special attention is paid to an innovative method of length measurement with tunable lasers and optical frequency comb. In the Practical Part, so-called Pilot Experimental Setup is described. It is a prototype that has been used to perform basic experiments on comparing of the two above mentioned methods. Based on experimental results and practical experience with the Pilot Experimental Setup, a Final Setup is designed. It comes in a form of a stand-alone instrument. | en |
dc.description.mark | A | cs |
dc.identifier.citation | VÉMOLA, T. Soustava Fabry-Perotova a Michelsonova interferometru pro měření délek s femtosekundovým laserem [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2011. | cs |
dc.identifier.other | 38857 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/20680 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Michelsonův interferometr | cs |
dc.subject | Fabryho-Pérotův interferometr | cs |
dc.subject | FPI | cs |
dc.subject | femtosekundový laser | cs |
dc.subject | optický hřeben | cs |
dc.subject | Michelson interferometer | en |
dc.subject | Fabry-Pérot interferometer | en |
dc.subject | FPI | en |
dc.subject | femtosecond laser | en |
dc.subject | frequency comb | en |
dc.title | Soustava Fabry-Perotova a Michelsonova interferometru pro měření délek s femtosekundovým laserem | cs |
dc.title.alternative | The system of Fabry-Perot and Michelson interferometer for length measurement with a femtosecond laser | en |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2011-06-20 | cs |
dcterms.modified | 2011-07-20-10:45:30 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 38857 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.27 06:52:14 | en |
sync.item.modts | 2025.01.15 18:24:36 | en |
thesis.discipline | Fyzikální inženýrství a nanotechnologie | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav fyzikálního inženýrství | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |
Files
Original bundle
1 - 3 of 3
Loading...
- Name:
- final-thesis.pdf
- Size:
- 8.73 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- review_38857.html
- Size:
- 8.97 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_38857.html