Optimalizace stanovení rozdělení tenzidu při fázové separaci v systému polymer-tenzid
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta chemická
Abstract
Tato diplomová práce se zabývá stanovením rozdělení tenzidu při fázové separaci v systému polymer-tenzid. Jako polymer byl zvolen hyaluronan sodný o třech různých molekulových hmotnostech a jako tenzid CTAB. Experimenty byly provedeny v prostředí 0,15 M NaCl. Měření koncentrace CTAB ve vzorcích bylo založeno na tvorbě barevných komplexů CTAB s kyselinou pikrovou v chloroformu. K detekci těchto komplexů byla použita UV-VIS spektroskopie. Byl stanoven obsah CTAB v gelech o čtyřech různých složeních (2 % Hya + 200 mM CTAB, 2 % Hya + 50 mM CTAB, 0,5 % Hya + 200 mM CTAB, 0,5 % Hya + 50 mM CTAB). Všechny gely byly postupně pětkrát promyty 0,15 M NaCl. Na základě dat z promývání lze usuzovat, jaké množství CTAB je v gelech vázáno elektrostaticky a stericky. Obsah CTAB byl stanoven u nově připravených gelů a u gelů po 2 a 4 měsících od přípravy. Na distribuci CTAB po fázové separaci má větší vliv původní koncentrace CTAB a hyaluronanu než molekulová hmotnost hyaluronanu. Obsah CTAB v nově připravených gelech i po 4 měsících po přípravě je velmi podobný a dokazuje stabilitu systému.
This diploma thesis is focused on the determination of distribution a surfactant at phase separation in polymer-surfactant system. Sodium hyaluronate of three molecular weights was chosen as a polymer, CTAB was used as a surfactant. The experiments were performed in an environment of 0,15 M NaCl. The measurement of the CTAB concentration in samples was based on the formation of coloured complexes of CTAB and picric acid in chloroform. UV-VIS spectroscopy was used for the detection of these complexes. The content of CTAB was determined in four gels of different composition (2% Hya + 200 mM CTAB, 2 % Hya + 50 mM CTAB, 0,5 % Hya + 200 mM CTAB, 0,5 % Hya + 50 mM CTAB). All gels were gradually washed five times with 0,15 M NaCl. The content of CTAB was determined for newly prepared gels and for gels after 2 and 4 months since the preparation. Initial concentrations of CTAB and hyaluronan have greater influence on the distribution of CTAB after phase separation, than the molecular weight of hyaluronan. The content of CTAB in newly prepared gels and after 4 months since preparation is very similar and demonstrates the stability of the system.
This diploma thesis is focused on the determination of distribution a surfactant at phase separation in polymer-surfactant system. Sodium hyaluronate of three molecular weights was chosen as a polymer, CTAB was used as a surfactant. The experiments were performed in an environment of 0,15 M NaCl. The measurement of the CTAB concentration in samples was based on the formation of coloured complexes of CTAB and picric acid in chloroform. UV-VIS spectroscopy was used for the detection of these complexes. The content of CTAB was determined in four gels of different composition (2% Hya + 200 mM CTAB, 2 % Hya + 50 mM CTAB, 0,5 % Hya + 200 mM CTAB, 0,5 % Hya + 50 mM CTAB). All gels were gradually washed five times with 0,15 M NaCl. The content of CTAB was determined for newly prepared gels and for gels after 2 and 4 months since the preparation. Initial concentrations of CTAB and hyaluronan have greater influence on the distribution of CTAB after phase separation, than the molecular weight of hyaluronan. The content of CTAB in newly prepared gels and after 4 months since preparation is very similar and demonstrates the stability of the system.
Description
Citation
SÁTOROVÁ, K. Optimalizace stanovení rozdělení tenzidu při fázové separaci v systému polymer-tenzid [online]. Brno: Vysoké učení technické v Brně. Fakulta chemická. 2015.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Spotřební chemie
Comittee
prof. Ing. Miloslav Pekař, CSc. (předseda)
prof. Ing. Michal Čeppan, CSc. (místopředseda)
doc. Ing. Irena Kratochvílová, Ph.D. (člen)
doc. Ing. Marián Lehocký, Ph.D. (člen)
prof. Ing. Michal Veselý, CSc. (člen)
prof. Ing. Oldřich Zmeškal, CSc. (člen)
doc. Ing. Karel Friess, Ph.D. (člen)
Date of acceptance
2015-06-01
Defence
Friess – výpočet obsahu karboxylových skupin
Lehocký – molární poměr hyaluronan ku CTAB
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení