Mechanical fracture characterization of alkali-activated slag mortars with standardized and natural sand

Simple item page
dc.contributor.authorŠimonová, Hanacs
dc.contributor.authorKucharczyková, Barbaracs
dc.contributor.authorBílek, Vlastimilcs
dc.contributor.authorKocáb, Daliborcs
dc.coverage.volume310cs
dc.date.issued2020-03-05cs
dc.description.abstractThis paper is focused on the development of the physical, mechanical and fracture characteristics of alkali-activated slag (AAS) mortars during ageing. The two AAS mortars were selected for the purpose of the experiment. The difference was in a type of used sand: first mortar was made using the standardized siliceous sand with the maximum nominal grain size of 2 mm and the second mortar using the natural sand with a maximum grain size of 4 mm. The results of the elastic, fracture and strength parameters determined within the time interval of 3 to 330 days of ageing are summarized in the paper. All experimental results were evaluated for the prismatic specimens with dimensions of 40 × 40 × 160 mm and were expressed by the average value and sample standard deviation calculated from three independent measurementsen
dc.formattextcs
dc.format.extent1-9cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationMATEC Web of Conferences. 2020, vol. 310, p. 1-9.en
dc.identifier.doi10.1051/matecconf/202031000021cs
dc.identifier.issn2261-236Xcs
dc.identifier.orcid0000-0003-1537-6388cs
dc.identifier.orcid0000-0002-7123-5099cs
dc.identifier.orcid0000-0003-3831-3443cs
dc.identifier.orcid0000-0002-8273-4571cs
dc.identifier.other162766cs
dc.identifier.researcheridJ-9776-2016cs
dc.identifier.researcheridAAM-3121-2020cs
dc.identifier.researcheridAAB-9386-2022cs
dc.identifier.researcheridAAW-8720-2020cs
dc.identifier.scopus57219392264cs
dc.identifier.scopus36171769500cs
dc.identifier.scopus56721310500cs
dc.identifier.urihttp://hdl.handle.net/11012/193481
dc.language.isoencs
dc.publisherEDP Sciencescs
dc.relation.ispartofMATEC Web of Conferencescs
dc.relation.urihttps://www.matec-conferences.org/articles/matecconf/abs/2020/06/matecconf_space20_00021/matecconf_space20_00021.htmlcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2261-236X/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectslagen
dc.subjectalkali-activationen
dc.subjectmortaren
dc.subjectfractureen
dc.titleMechanical fracture characterization of alkali-activated slag mortars with standardized and natural sanden
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-162766en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:38:17en
sync.item.modts2025.01.17 18:42:47en
thesis.grantorVysoké učení technické v Brně. Fakulta chemická. Ústav chemie materiálůcs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechanikycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavebního zkušebnictvícs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
matecconf_space20_00021.pdf
Size:
441.03 KB
Format:
Adobe Portable Document Format
Description:
matecconf_space20_00021.pdf
Download
Collections
Ústav stavební mechaniky
Ústav chemie materiálů
Ústav stavebního zkušebnictví