Stend pro analýzu rekuperace energie v experimentálním vozidle
Loading...
Date
Authors
Indruch, Jiří
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce se zabývá návrhem konstrukce experimentálního stendu pro simulaci rekuperace energie na strojích s hydrostatickou transmisí energie. Práce popisuje volbu zapojení a výběr hydrostatických a jiných komponent. Část práce se zabývá výpočtem a návrhem setrvačníku, který svou rotační kinetickou energií odpovídá v jistém měřítku translační kinetické energii experimentálního vozidla. V práci je nastíněna účinnost transformace rotační kinetické energie na energii tlakovou, její akumulace a následný převod zpět na rotační kinetickou energii. Přesné určení účinnosti hydrostatické rekuperace je jedním z cílů experimentů, které budou na stendu prováděny. Úkolem měření a fyzikálně-technických analýz, jež budou prováděny na vyrobeném stendu, je především získání poznatků v oblasti precizního řízení hydrostatického systému rekuperace energie, pro jeho maximální efektivnost.
The diploma thesis deals with design of an experimental test bench for recovery energy simulation at machines with hydrostatic energy transmission. This work describes choice of connection and selection of hydrostatic and other components. A first part of the thesis deals with calculation and design of the flywheel whose is its rotational kinetic energy corresponds in a certain scale to translational kinetic energy of the experimental vehicle. The thesis outlines the efficiency of transformation of rotational kinetic energy to pressure energy its accumulation and subsequent conversion back to rotational kinetic energy. Precise determination of the effectiveness of hydrostatic recovery is one of the objectives of experiments that will be implemented at the test bench. The task of the measurement and physical-technical analysis to be conducted at the manufactured test bench is primarily to obtain data at for the precise control of the hydrostatic energy recovery system to maximize its efficiency.
The diploma thesis deals with design of an experimental test bench for recovery energy simulation at machines with hydrostatic energy transmission. This work describes choice of connection and selection of hydrostatic and other components. A first part of the thesis deals with calculation and design of the flywheel whose is its rotational kinetic energy corresponds in a certain scale to translational kinetic energy of the experimental vehicle. The thesis outlines the efficiency of transformation of rotational kinetic energy to pressure energy its accumulation and subsequent conversion back to rotational kinetic energy. Precise determination of the effectiveness of hydrostatic recovery is one of the objectives of experiments that will be implemented at the test bench. The task of the measurement and physical-technical analysis to be conducted at the manufactured test bench is primarily to obtain data at for the precise control of the hydrostatic energy recovery system to maximize its efficiency.
Description
Citation
INDRUCH, J. Stend pro analýzu rekuperace energie v experimentálním vozidle [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2010.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Konstrukční inženýrství
Comittee
prof. Ing. Martin Hartl, Ph.D. (předseda)
doc. Ing. Ivan Mazůrek, CSc. (místopředseda)
Ing. Martin Anderle (člen)
prof. Ing. Marián Dzimko, CSc. (člen)
Ing. Oldřich Veselý (člen)
prof. Ing. Pavel Hutař, Ph.D. (člen)
Ing. Aleš Dočkal, Ph.D. (člen)
Ing. Bronislav Růžička, Ph.D. (člen)
doc. Ing. Pavel Maňas, Ph.D. (člen)
Ing. Jan Čermák, Ph.D., MBA (člen)
Date of acceptance
2010-06-24
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení