The assessment and treatment of waste from glass fibre production for use as a filler in composites

Simple item page
dc.contributor.authorHudec Jakubíková, Karolínacs
dc.contributor.authorHermann, Radekcs
dc.contributor.authorDrochytka, Rostislavcs
dc.coverage.volume385cs
dc.date.accessioned2024-02-20T09:46:14Z
dc.date.available2024-02-20T09:46:14Z
dc.date.issued2023-10-30cs
dc.description.abstractWaste glass from fibreglass production is waste that is generated at various stages of production. In nature, it is a combination of glass fibres, fine dust, but also larger glass grains, for example also from leakages during production. This material is or may be contaminated by impregnation, lubricants or some impurities that prevent its recovery during production. The main objective of this study is to assess the suitability of glass fibre waste and to optimise the pre-treatment of the raw material for use in the composite. This paper describes the determination of chemical composition, mineralogical composition by X-ray diffraction analysis, determination of bulk density, water absorption and specific surface area. The results obtained are compared with the primary raw material - glass fibre. The results showed that the waste from glass fibre production is primarily composed of silica, calcium, alumina and boron. Minor components include magnesium oxide, sodium oxide, fluorine, iron oxide, strontium oxide, potassium oxide, titanium dioxide, sulphur dioxide and chromium oxide. The specific surface area of treated glass fibre waste correlates with the specific surface area of cement, which is a prerequisite for the use of this waste as a partial substitute for cement in the production of building materials.en
dc.formattextcs
dc.format.extent9cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationMATEC Web of Conferences. 2023, vol. 385, 9 p.en
dc.identifier.doi10.1051/matecconf/202338501037cs
dc.identifier.issn2261-236Xcs
dc.identifier.orcid0000-0002-6779-7259cs
dc.identifier.orcid0000-0002-7123-1338cs
dc.identifier.other187485cs
dc.identifier.scopus57210643378cs
dc.identifier.urihttps://hdl.handle.net/11012/245078
dc.language.isoencs
dc.publisherMATEC Web of Conferencescs
dc.relation.ispartofMATEC Web of Conferencescs
dc.relation.urihttps://www.matec-conferences.org/articles/matecconf/abs/2023/12/matecconf_ys2023_01037/matecconf_ys2023_01037.htmlcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2261-236X/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectWaste glassen
dc.subjectfilleren
dc.subjectcompositesen
dc.titleThe assessment and treatment of waste from glass fibre production for use as a filler in compositesen
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-187485en
sync.item.dbtypeVAVen
sync.item.insts2024.02.20 10:46:14en
sync.item.modts2024.02.20 10:14:13en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav technologie stavebních hmot a dílcůcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
matecconf_ys2023_01037.pdf
Size:
400.06 KB
Format:
Adobe Portable Document Format
Description:
file matecconf_ys2023_01037.pdf
Download
Collections
Ústav technologie stavebních hmot a dílců