Možnosti uplatnění syntetického ostřiva na bázi cihelného prachu pro cihlářskou výrobu
Loading...
Date
Authors
Prokopová, Zdeňka
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Diplomová práce je zaměřena na recyklaci cihelného brusného prachu v podobě syntetických ostřiv vyrobených na peletizačním talíři ve firmě Svoboda a syn, s.r.o. V teoretické části je popsána keramická surovinová směs, běžně používaná keramická ostřiva a odpadní látky používané jako ostřiva. Dále je zde uvedeno několik publikovaných příkladů pokusů o výrobu či využití uměle vyráběných ostřiv, a i několik příkladů prodávaných umělých ostřiv. V závěru teoretické části jsou uvedeny příklady normových metod zkoušení keramických ostřiv. V praktické části se v laboratorních podmínkách ověřovalo chování syntetického ostřiva vyrobeného na peletizačním talíři v keramickém těstě. Hodnotilo se chování v plastickém těstě a ve vypáleném střepu. V plastickém těstě se hodnotili délkové změny sušením, citlivost k sušení, obsah rozdělávací vody. Ve vypáleném střepu se hodnotily délkové změny, pevnost a tepelná vodivost. Dále se hodnotila i změna granulometrie, tvaru a rozložení ostřiva. Výsledky se porovnali se standartně používanými ostřivy, a to s křemenným pískem a moravskou drobou. Z dosažených výsledků se dá vyhodnotit použití syntetických ostřiv jako vhodné, avšak je zapotřebí provést obsáhlejší zkoušky.
The diploma thesis is focused on the recycling of brick sanding dust in the form of synthetic grog produced on a pelletizing plate in the company Svoboda a syn, s.r.o. The theoretical part describes the ceramic raw material mixture, commonly used ceramic grog and waste materials used as grog. There are also several published examples of attempts to produce or use synthetic grog, as well as several examples of synthetic grogs offered for sale. At the end of the theoretical part there are given examples of standard methods of testing ceramic grog. In the practical part, the behavior of synthetic grog produced on a pelletizing plate in a ceramic dough was verified in laboratory conditions. The grog was evaluated in plastic dough and burnt shard. Length changes in drying dough, drying sensitivity, distribution water content were evaluated in plastic dough. Length changes, strength and thermal conductivity were evaluated in the fired shard. The change in granulometry, shape and distribution of the grog was also evaluated. The results were compared with standardly used grogs, namely quartz sand and Moravian o ffal. From the results obtained, the use of synthetic grogs can be evaluated as suitable, but more extensive tests are needed.
The diploma thesis is focused on the recycling of brick sanding dust in the form of synthetic grog produced on a pelletizing plate in the company Svoboda a syn, s.r.o. The theoretical part describes the ceramic raw material mixture, commonly used ceramic grog and waste materials used as grog. There are also several published examples of attempts to produce or use synthetic grog, as well as several examples of synthetic grogs offered for sale. At the end of the theoretical part there are given examples of standard methods of testing ceramic grog. In the practical part, the behavior of synthetic grog produced on a pelletizing plate in a ceramic dough was verified in laboratory conditions. The grog was evaluated in plastic dough and burnt shard. Length changes in drying dough, drying sensitivity, distribution water content were evaluated in plastic dough. Length changes, strength and thermal conductivity were evaluated in the fired shard. The change in granulometry, shape and distribution of the grog was also evaluated. The results were compared with standardly used grogs, namely quartz sand and Moravian o ffal. From the results obtained, the use of synthetic grogs can be evaluated as suitable, but more extensive tests are needed.
Description
Keywords
Ostřivo, syntetické ostřivo, umělé ostřivo, cihelný brusný prach, recyklace, granulace, peletizace, keramika, keramické ostřivo, neplastické suroviny, ekologie materiálů., Grog, synthetic grog, artificial grog, brick sanding dust, recycling, granulation, pelletization, ceramics, ceramic grog, non-plastic raw materials, ecology of materials.
Citation
PROKOPOVÁ, Z. Možnosti uplatnění syntetického ostřiva na bázi cihelného prachu pro cihlářskou výrobu [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2022.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
Ing. Jiří Lerch - předseda,
Ing. Michal Holák - místopředseda,
Ing. Jindřich Melichar, Ph.D. - tajemník,
prof. Ing. Rostislav Drochytka, CSc., MBA, dr.h.c. - člen,
doc. Ing. Jiří Bydžovský, CSc. - člen,
doc. Ing. Radomír Sokolář, Ph.D. - člen,
doc. Ing. Nikol Žižková, Ph.D. - člen,
Ing. Martin Sedlmajer, Ph.D. - člen,
Date of acceptance
2022-02-01
Defence
Připomínky v hodnocení vedoucího i posudku oponenta byly vysvětleny ke spokojenosti komise.
Doc. Žižková: Jak se vyrábí ostřivo číslo 10?
Ing. Holák: Jaký je ekologický přínos práce? Prováděl jste ekonomické porovnání vůči standartním ostřivům?
Ing. Lerch: Popište nám podrobněji vyvíjený materiál.
Otázky členů komise byly zodpovězeny k jejich spokojenosti.
Result of defence
práce byla úspěšně obhájena
Document licence
Přístup k plnému textu prostřednictvím internetu byl licenční smlouvou omezen na dobu 3 roku/let