Modelování toku odpadu v České republice
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Strategické plánování je základem pro efektivitu a udržitelnost odpadového hospodářství. Pro efektivní plánování je zásadní sběr dat a jejich porozumění. Ke zhodnocení dosavadního nakládání s odpadem je důležitá informace o tocích odpadu. Tato informace byla dosud dostupná v České republice pouze agregovaně na státní úrovni. V této práci byl vytvořen přístup na rekonstrukci toků odpadu z dostupných dat i na nižším územním členění. Přístup je tvořen dvěma optimalizačními modely: dílčím a finálním. Dílčí model je založen na expertních předpokladech. Rekonstrukce toků odpadu dílčím modelem probíhá postupně po menších skupinách toků. Výpočet dílčího modelu je opakován s různým složením skupin toků optimalizovaných najednou. Při každém opakování jsou získána kandidátní řešení, která slouží jako vstupní data pro finální model. Konečná rekonstrukce toků odpadu je výsledkem finálního modelu. Vývoj a testování modelů probíhalo na testovacích úlohách založených na reálných datech z odpadového hospodářství České republiky.
Strategic planning is the basis for efficient and sustainable waste management. Data collection and its deep understanding are essential for effective planning. Waste flows are an important information to assess waste management to date. This information has so far been available only aggregated at national level in the Czech Republic. In this thesis, an approach has been developed to reconstruct the waste flows at a sub-national level from available data. The approach consists of two optimization models: partial and final. The partial model is based on expert assumptions. The reconstruction of the flows by the partial model is done sequentially in smaller groups of flows. The computation of the partial model is repeated with different composition of the groups of flows optimized at the same time. Each iteration results in a~candidate solution which is used as an input data for the final model. The solution of the final model yields the final reconstruction of the waste flows. Model development and testing was carried out on problems simulated based on the real data from the waste management of the Czech Republic.
Strategic planning is the basis for efficient and sustainable waste management. Data collection and its deep understanding are essential for effective planning. Waste flows are an important information to assess waste management to date. This information has so far been available only aggregated at national level in the Czech Republic. In this thesis, an approach has been developed to reconstruct the waste flows at a sub-national level from available data. The approach consists of two optimization models: partial and final. The partial model is based on expert assumptions. The reconstruction of the flows by the partial model is done sequentially in smaller groups of flows. The computation of the partial model is repeated with different composition of the groups of flows optimized at the same time. Each iteration results in a~candidate solution which is used as an input data for the final model. The solution of the final model yields the final reconstruction of the waste flows. Model development and testing was carried out on problems simulated based on the real data from the waste management of the Czech Republic.
Description
Citation
NĚMCOVÁ, L. Modelování toku odpadu v České republice [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. RNDr. Zdeněk Pospíšil, Dr. (předseda)
prof. Mgr. Pavel Řehák, Ph.D. (místopředseda)
doc. Mgr. Zuzana Hübnerová, Ph.D. (člen)
doc. Mgr. Zdeněk Opluštil, Ph.D. (člen)
doc. RNDr. Jiří Klaška, Dr. (člen)
Date of acceptance
2023-06-15
Defence
Studentka představila svoji diplomovou práci na téma Modelování toku odpadu v České republice. Představila modely pro optimalizace různých parametrů. Dále studentka odpovídala na dotazy dané oponentem práce. V následující diskuzi se doc. Hubnerová ptala na opakovatelnost v permutacích při výběru.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení