Zařízení pro měření úrovně plynů s kapilárou vyrobenou 3-D tiskem
Loading...
Date
Authors
Halva, Ondřej
ORCID
Advisor
Referee
Mark
D
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Tato práce se zabývá experimentálním návrhem, realizací a testováním prototypu kapiláry vyrobenou 3D tiskem. Má za úkol seznámit čtenáře s problematikou 3D tisku týkající se výroby kapilár a zaměřit se na chemorezistivní senzory. Dále také dojde popisu s vlastnostmi mikrokontroleru Atmel Atmega2560 a jeho možnostmi v senzorové technice. V druhé části práce je pak navržena a realizována kapilára pro předzpracování vzorků s výstupem na zařízení na měření obsahů plynů s elektrochemickým senzorem, zařízení má přitom pro řízení používat mikrokontroler Atmel Atmega2560 a musí umožňovat přenos dat na PC. U kapiláry mají být zhodnoceny možnosti jejího použití.
This thesis is concerned with the experimental design, manufacture, and testing of a 3D printed prototype of a capillary. The aim is to introduce the reader to the issue of 3D printing related to the manufacture of capillaries and focus on chemiresist sensors. Furthermore, the features of microcontroller Atmel Atmega2560 and its applications in sensory technology will be described. In the second part of the thesis, the capillary for sample pre-processing with an output to a gas measuring device with an electrochemical sensor is designed and produced. For the control of the device, the Atmel Atmega 2560 microcontroller is to be used and the device must enable data transfer to PC. The possible applications of the capillary are to be evaluated.
This thesis is concerned with the experimental design, manufacture, and testing of a 3D printed prototype of a capillary. The aim is to introduce the reader to the issue of 3D printing related to the manufacture of capillaries and focus on chemiresist sensors. Furthermore, the features of microcontroller Atmel Atmega2560 and its applications in sensory technology will be described. In the second part of the thesis, the capillary for sample pre-processing with an output to a gas measuring device with an electrochemical sensor is designed and produced. For the control of the device, the Atmel Atmega 2560 microcontroller is to be used and the device must enable data transfer to PC. The possible applications of the capillary are to be evaluated.
Description
Citation
HALVA, O. Zařízení pro měření úrovně plynů s kapilárou vyrobenou 3-D tiskem [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
doc. Ing. Jiří Háze, Ph.D. (předseda)
prof. Ing. Jiří Kazelle, CSc. (místopředseda)
doc. Ing. Vilém Kledrowetz, Ph.D. (člen)
Ing. Vojtěch Dvořák, Ph.D. (člen)
Ing. Josef Skácel (člen)
Date of acceptance
2023-06-07
Defence
Student seznámil státní zkušební komisi s řešením své diplomové práce a zodpověděl otázky a připomínky oponenta. Dále odpověděl na otázky komise: Je možné navrhnutým senzorem rozeznat etanol a etylalkohol? Vysvětlete kapilární elevaci a kapilární depresi. Jaké bylo programové vybavení zařízení? Jaký byl průměr kapiláry? Který průměr kapiláry je nejlepší? Jedna otázka byla zodpovězena se zaváháním, zbylé otázky byly zodpovězeny bez větších problémů.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení