Lomové testy vybraných těles se speciálním plnivem: experimenty a numerická simulace
but.committee | prof. Ing. Norbert Jendželovský, PhD. - předseda, doc. Ing. Ivan Němec, CSc. - místopředseda, Ing. Michal Jedlička - tajemník, Ing. Martin Lipowczan - tajemník, Ing. Radim Nečas, Ph.D. - člen, prof. Ing. Zdeněk Kala, Ph.D. - člen, doc. Ing. Jiří Kytýr, CSc. - člen, doc. Ing. David Lehký, Ph.D. - člen, doc. Ing. Stanislav Seitl, Ph.D. - člen | cs |
but.defence | Student Majda Tomáš seznámil komisi s obsahem své diplomové práce. Na otázky a připomínky plynoucí z posudků vedoucího a oponenta a komise při odborné rozpravě nad diplomovou prací ~Lomové testy vybraných těles se speciálním plnivem: experimenty a numerická simulace~ reagoval dobře. | cs |
but.jazyk | čeština (Czech) | |
but.program | Stavební inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Keršner, Zbyněk | cs |
dc.contributor.author | Majda, Tomáš | cs |
dc.contributor.referee | Malíková, Lucie | cs |
dc.date.created | 2019 | cs |
dc.description.abstract | Diplomová práce se zabývá vybranými lomovými testy a vyhodnocením lomových parametrů těles z~cementových kompozitů. Jedna část práce se zabývá cementovým kompozitem se skleněným sférickým plnivem jednotné frakce 2 mm. Po výrobě byly trámce rozměrů 20×40×200 mm vystaveny teplotám v rozmezí 100 až 1000 °C po dobu jedné hodiny. Užitím nedestruktivní metody ultrazvukových impulzů byl určen stupeň poškození teplotním zatížením. Vybraná tělesa byla poté lomově testována tříbodovým ohybem a na úlomcích zjištěna informativní pevnost v tlaku. V druhé části byla pozornost věnována vyhodnocení lomových testů betonových těles z jádrových vývrtů odebraných z objektů bývalého Plynárenského řídicí centra Transgas v Praze. Zkušební tělesa byla opatřena šípovým vrubem a následně zkoušena v tříbodovém ohybu. Naměřená data byla upravena programem GTDiPS a v případě kompozitu se skleněným plnivem byl k vyhodnocení lomových parametrů použit program StiCrack. | cs |
dc.description.abstract | The diploma thesis deals with selected fracture tests and evaluation of fracture parameters of cement-based composite. One part of the thesis deals with cement-based composite with glass spherical aggregate of a single fraction of 2 mm. After production, the beams with dimensions of 20×40×200mm exposed to temperatures in the range from 100 to 1000 °C for one hour. Using the non-destructive ultrasonic pulse method, the degree of damage caused by termal load was determined. Selected specimen with central edge notch were then tested in three-point bending and fragments after these tests were tested in compression. In the second part, attention was paid to the evaluation of fracture tests conducted on specimen from drill-cores taken from selected objects located at the former Transgas Gas Control Center in Prague. The specimen were provided with a chevron notch before being tested in three-point bending. The measured data was modified by the GTDiPS program and in the case of the glass composite the StiCrack program was used to evaluate fracture parameters. | en |
dc.description.mark | C | cs |
dc.identifier.citation | MAJDA, T. Lomové testy vybraných těles se speciálním plnivem: experimenty a numerická simulace [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2019. | cs |
dc.identifier.other | 118793 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/137703 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta stavební | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Beton | cs |
dc.subject | lomový test | cs |
dc.subject | diagram síla–posun | cs |
dc.subject | jemnozrnný cementový kompozit | cs |
dc.subject | skleněný sférický agregát | cs |
dc.subject | vysoká teplota | cs |
dc.subject | program GTDiPS | cs |
dc.subject | program StiCrack | cs |
dc.subject | Concrete | en |
dc.subject | fracture test | en |
dc.subject | diagram force–displacement | en |
dc.subject | fine-grained cement-based composite | en |
dc.subject | glass spherical aggregate | en |
dc.subject | high temperature | en |
dc.subject | software GTDiPS | en |
dc.subject | software StiCrack | en |
dc.title | Lomové testy vybraných těles se speciálním plnivem: experimenty a numerická simulace | cs |
dc.title.alternative | Fracture tests of selected specimens with special aggregates: experiments and numerical simulation | en |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2019-01-29 | cs |
dcterms.modified | 2020-05-28-14:08:42 | cs |
eprints.affiliatedInstitution.faculty | Fakulta stavební | cs |
sync.item.dbid | 118793 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.26 19:13:37 | en |
sync.item.modts | 2025.01.15 13:19:29 | en |
thesis.discipline | Konstrukce a dopravní stavby | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechaniky | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |
Files
Original bundle
1 - 4 of 4
Loading...
- Name:
- final-thesis.pdf
- Size:
- 7.85 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- Posudek-Vedouci prace-46559.pdf
- Size:
- 76.41 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek-Vedouci prace-46559.pdf
Loading...
- Name:
- Posudek-Oponent prace-46478.pdf
- Size:
- 578.73 KB
- Format:
- Adobe Portable Document Format
- Description:
- Posudek-Oponent prace-46478.pdf
Loading...
- Name:
- review_118793.html
- Size:
- 1.46 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_118793.html