Business centrum
Loading...
Date
Authors
Suchomel, Tomáš
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Cílem diplomové práce byl návrh nosné ocelové konstrukce vícepodlažní budovy. Budova má půdorysné rozměry 35x35 m. Střecha se nachází ve výšce 48,5 m což je 13. nadzemní podlaží budovy. Přes výšku konstrukce se půdorysná plocha podlaží zmenšuje a od poloviny budovy se opět zvětšuje do původního tvaru. Byly navrženy dvě alternativy. Shodují se v celkovém tvaru konstrukce a odlišují v zajištění prostorové tuhosti. Stropní systém je navržen jako stropnicová soustava. Konstrukce byla posouzena jednak na MSÚ, jednak na MSP, a to v souladu s aktuálně platnými eurokódy. Opláštění budovy je ze skleněných panelů.
The aim of this Master’s thesis is to design a load-bearing steel structure for a multi-storey building. The building is of 35 x 35 m floor plan. The roof is at height of 48,5 m which is the 13th above-ground floor of the building. In the bottom half of the building, the floor plan area is continuously decreasing from the ground up while in the top half of the building, the floor plan area is increasing from the middle to the top part of the building. The floor plan area of the ground floor and the top-most floor are of the same size. Two alternative plans were designed. They are of the same shape of the structure while differentiating in the solution for the spatial rigidity of the structure. The ceiling design is designed as a joist system. The structure was assessed by ULS and by SLS in accordance with valid eurocodes. The structure is glass-sheathed.
The aim of this Master’s thesis is to design a load-bearing steel structure for a multi-storey building. The building is of 35 x 35 m floor plan. The roof is at height of 48,5 m which is the 13th above-ground floor of the building. In the bottom half of the building, the floor plan area is continuously decreasing from the ground up while in the top half of the building, the floor plan area is increasing from the middle to the top part of the building. The floor plan area of the ground floor and the top-most floor are of the same size. Two alternative plans were designed. They are of the same shape of the structure while differentiating in the solution for the spatial rigidity of the structure. The ceiling design is designed as a joist system. The structure was assessed by ULS and by SLS in accordance with valid eurocodes. The structure is glass-sheathed.
Description
Citation
SUCHOMEL, T. Business centrum [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2023.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Ing. Pavel Ryjáček, Ph.D. (předseda)
prof. Ing. Miroslav Bajer, CSc. (místopředseda)
doc. Ing. Jan Barnat, Ph.D. (člen)
Ing. Michal Štrba, Ph.D. (člen)
prof. Ing. Jiří Kala, Ph.D. (člen)
Ing. Tomáš Hrbáček (člen)
Date of acceptance
2023-02-01
Defence
Student v rámci obhajoby prezentoval zadání a hlavní výsledky své diplomové práce a vyjádřil se k připomínkám a dotazům oponenta. V následné diskuzi reagoval na dotazy členů zkušební komise k závěrečné práci:
Přerušení betonové stropní desky v místě připojení diagonál ztužidla. (prof. Ryjáček)
Vliv připojení diagonály na namáhání nosníku. (Ing. Hrbáček)
Nastavení podepření ve statickém modelu. (prof. Ryjáček)
Ruční ověření statického výpočtu. (prof. Bajer)
Přenos zatížení ve sloupu tvořeném ocelovou trubkou vyplněnou betonem. (Ing. Hrbáček)
Konstrukční řešení montážních spojů spřažených sloupů. (Ing. Štrba)
Obhajoba práce byla zkušební komisí hodnocena velmi dobře.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení