Optimální modelování nýtového spoje pomocí metody konečných prvků
but.committee | doc. Ing. Ivo Jebáček, Ph.D. (předseda) doc. Ing. Jiří Hlinka, Ph.D. (místopředseda) doc. Ing. Jaroslav Juračka, Ph.D. (člen) Ing. Robert Popela, Ph.D. (člen) Ing. Miroslav Šplíchal, Ph.D. (člen) | cs |
but.defence | Student presented his Master´s thesis within the specified time schedule and answered all questions of the reviewer. Following questions were asked by expert committee about the Master's thesis, presentation and related topics: 1) How was the mesh created in the rivet area and how was the effect of torsion load? Answer: Rectangular mesh area close to the rounded holes for rivets, this mesh composition had the best results. 2) Were bonded joints also considered for analyses and compared to the rivetted one? How to model it for the analysis? Answer: Tricky might be the adhesive modelling - which property to assign to the element and boundaries in contact. If verified model, it could be easier for analyses. Student answered very well the set of questions. | cs |
but.jazyk | angličtina (English) | |
but.program | Strojní inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Bartoněk, Jaroslav | en |
dc.contributor.author | Giorgobiani, Ioseb | en |
dc.contributor.referee | Katrňák, Tomáš | en |
dc.date.created | 2020 | cs |
dc.description.abstract | Diplomová práce je zaměřena na optimální modelování nýtového spoje pro tři různé konfigurace pomocí metody konečných prvků v programu MSC. Nastran/Patran. Na základě prezentovaných výsledků je možné virtuálně simulovat chování nýtových spojů při zatížení, za účelem správného návrhu před provedením statických pevnostních zkoušek. Použitím těchto MKP simulací v procesu certifikace výrobku lze významně redukovat časovou i finanční náročnost pevnostních zkoušek. Při lepším porozumění chování konstrukce lze také lépe predikovat reálnou únosnost nýtových spojů. | en |
dc.description.abstract | The thesis in focused on finding optimal model for three different configuration rivets in MSC Nastran/Patran software. With the outcome of this findings it will be possible to virtually check engineers understanding of rivet joints behavior under some load, in order to take another step which is the case of real static tests. By inserting Finite Element Analysis step in products certification protocol, time and budget consuming static test can be reduced to the minimum. If an engineer could better understand structure’s behavior, there would be much less chance of it to collapse earlier than expected load. | cs |
dc.description.mark | B | cs |
dc.identifier.citation | GIORGOBIANI, I. Optimální modelování nýtového spoje pomocí metody konečných prvků [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2020. | cs |
dc.identifier.other | 125203 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/193154 | |
dc.language.iso | en | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | MKP | en |
dc.subject | Nýtový spoj | en |
dc.subject | MSC.Nastran/Patran | en |
dc.subject | CBUSH element | en |
dc.subject | CBEAM element | en |
dc.subject | RBE elementy. | en |
dc.subject | FEM | cs |
dc.subject | Rivet joint | cs |
dc.subject | MSC Nastra/Patran | cs |
dc.subject | CBUSH element | cs |
dc.subject | CBEAM element | cs |
dc.subject | RBE elements. | cs |
dc.title | Optimální modelování nýtového spoje pomocí metody konečných prvků | en |
dc.title.alternative | Optimal modelling of rivet joints using finite element method | cs |
dc.type | Text | cs |
dc.type.driver | masterThesis | en |
dc.type.evskp | diplomová práce | cs |
dcterms.dateAccepted | 2020-07-24 | cs |
dcterms.modified | 2020-07-29-08:33:40 | cs |
eprints.affiliatedInstitution.faculty | Fakulta strojního inženýrství | cs |
sync.item.dbid | 125203 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.27 08:55:57 | en |
sync.item.modts | 2025.01.15 21:05:22 | en |
thesis.discipline | Stavba letadel | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta strojního inženýrství. Letecký ústav | cs |
thesis.level | Inženýrský | cs |
thesis.name | Ing. | cs |