Measurement of the airflow velocity upstream and downstream a wire mesh using constant temperature anemometry

Loading...
Thumbnail Image

Authors

Lízal, František
Tuhovčák, Ján
Jícha, Miroslav

Advisor

Referee

Mark

Journal Title

Journal ISSN

Volume Title

Publisher

EDP Sciences
Altmetrics

Abstract

Measurement of velocity upstream and downstream a special wire mesh was performed to ascertain the effect of the mesh on the flow. The mesh consisted of two components, a basic rectangular mesh with mesh width 1.22 mm and wire diameter 0.2 mm, and a top steel wool with random position of wires and wire diameter 0.05 mm. The velocity was measured by Constant Temperature Anemometry using single wire probe in a Plexiglas channel of rectangular cross-section. As a first step, measurement of one horizontal and one vertical measuring line was performed 10 mm upstream and 6 mm downstream the wire mesh. A spatial velocity profile upstream of the wire mesh was smooth, while the downstream velocity profile was highly disturbed. However, velocity fluctuations expressed in terms of turbulence intensity downstream of the wire mesh were attenuated down to 1%. Further measurements of the area downstream the wire mesh will be performed to describe the development of the flow.
Measurement of velocity upstream and downstream a special wire mesh was performed to ascertain the effect of the mesh on the flow. The mesh consisted of two components, a basic rectangular mesh with mesh width 1.22 mm and wire diameter 0.2 mm, and a top steel wool with random position of wires and wire diameter 0.05 mm. The velocity was measured by Constant Temperature Anemometry using single wire probe in a Plexiglas channel of rectangular cross-section. As a first step, measurement of one horizontal and one vertical measuring line was performed 10 mm upstream and 6 mm downstream the wire mesh. A spatial velocity profile upstream of the wire mesh was smooth, while the downstream velocity profile was highly disturbed. However, velocity fluctuations expressed in terms of turbulence intensity downstream of the wire mesh were attenuated down to 1%. Further measurements of the area downstream the wire mesh will be performed to describe the development of the flow.

Description

Document type

Peer-reviewed

Document version

Published version

Date of access to the full text

Language of document

en

Study field

Comittee

Date of acceptance

Defence

Result of defence

Endorsement

Review

Supplemented By

Referenced By

Creative Commons license

Except where otherwised noted, this item's license is described as Creative Commons Attribution 2.0 Generic
Citace PRO