Design of collectors in centrifugal spinning: Effect on the fiber yield and morphology

Simple item page
dc.contributor.authorNaseri Joda, Nasrollahcs
dc.contributor.authorInce, Ahmet Erdemcs
dc.contributor.authorŘíhová, Martinacs
dc.contributor.authorPavliňák, Davidcs
dc.contributor.authorMacák, Jancs
dc.coverage.issue1cs
dc.coverage.volume54cs
dc.date.accessioned2025-04-04T11:56:54Z
dc.date.available2025-04-04T11:56:54Z
dc.date.issued2024-10-01cs
dc.description.abstractCentrifugal spinning is an increasingly popular and viable method to produce fibers of different compositions. However, there are still aspects to investigate and improve in the centrifugal spinning process, such as optimizing the fiber yield and obtaining defect-free fiber morphology. To address this gap, the effects of the collectors on the fiber yield and their morphology were investigated in this work. An aqueous solution with 18 wt% of PVP and two needles (18G and 21G) with different diameters and three different spinning speeds (5000, 7000, and 9000 RPM) were used to explore a set of fiber collectors with various collector spacing (1, 3, 6, 12, and 18 cm distance between the collectors' bars). The results of the experiments showed that fiber collectors affect the yield of the process and the fiber morphology to some (non-negligible) extent. Denser collectors enabled higher yield, thus reducing the waste, and positively affecting the beading of fibers. The knowledge obtained in this work about the influence of collectors on the centrifugal processing of basic polymers can be with an advantage applied to the processing of different polymers and needles used within the centrifugal spinning process.en
dc.formattextcs
dc.format.extent1-20cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationJournal of Industrial Textiles. 2024, vol. 54, issue 1, p. 1-20.en
dc.identifier.doi10.1177/15280837241298641cs
dc.identifier.issn1530-8057cs
dc.identifier.orcid0000-0001-5861-6463cs
dc.identifier.orcid0000-0002-4815-9374cs
dc.identifier.orcid0000-0001-9669-7946cs
dc.identifier.orcid0000-0001-7091-3022cs
dc.identifier.other191209cs
dc.identifier.researcheridG-2816-2019cs
dc.identifier.researcheridM-7529-2015cs
dc.identifier.scopus000248159374cs
dc.identifier.scopus56226267000cs
dc.identifier.scopus55655855500cs
dc.identifier.urihttps://hdl.handle.net/11012/250798
dc.language.isoencs
dc.publisherSAGE PUBLICATIONS INCcs
dc.relation.ispartofJournal of Industrial Textilescs
dc.relation.urihttps://journals.sagepub.com/doi/10.1177/15280837241298641cs
dc.rightsCreative Commons Attribution-NonCommercial 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1530-8057/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc/4.0/cs
dc.subjectCentrifugal spinningen
dc.subjectfibers yielden
dc.subjectcollectoren
dc.subjectneedleen
dc.subjectairflowen
dc.titleDesign of collectors in centrifugal spinning: Effect on the fiber yield and morphologyen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-191209en
sync.item.dbtypeVAVen
sync.item.insts2025.04.04 13:56:54en
sync.item.modts2025.04.02 12:32:05en
thesis.grantorVysoké učení technické v Brně. Středoevropský technologický institut VUT. Pokročilé nízkodimenzionální nanomateriálycs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
naserijodaetal2024.pdf
Size:
2.24 MB
Format:
Adobe Portable Document Format
Description:
file naserijodaetal2024.pdf
Download
Collections
Pokročilé nízkodimenzionální nanomateriály