Porušování jemnozrnného cementového kompozitu v blízkosti rozhraní plniva a matrice

but.committeeprof. Ing. Marcela Karmazínová, CSc. (předseda) doc. Ing. Lumír Miča, Ph.D. (člen) prof. Ing. Drahomír Novák, DrSc. (člen) doc. Ing. Otto Plášek, Ph.D. (člen) prof. Ing. Stanislav Vejvoda, CSc. (člen) prof. Ing. Petr Kabele, Ph.D (člen) doc. Ing. Tomáš Profant, Ph.D. (člen) prof. Dr.techn. Ing. Michal Varaus (člen)cs
but.jazykčeština (Czech)
but.programStavební inženýrstvícs
but.resultpráce byla úspěšně obhájenacs
dc.contributor.advisorKeršner, Zbyněkcs
dc.contributor.authorVyhlídal, Michalcs
dc.contributor.refereeKabele,, Petrcs
dc.contributor.refereeProfant, Tomášcs
dc.date.created2023cs
dc.description.abstractPřechodová oblast mezi zrnem kameniva/výztuží a matricí je považována za nejslabší článek cementových kompozitů a dle některých autorů přímo souvisí s jejich nelineárním (přesněji kvazikřehkým) chováním. Tato práce si klade za cíl ověřit tento obecně uznávaný předpoklad nejslabšího článku za pomoci lomových experimentů a jim odpovídajícím numerických simulací. V experimentální části práce byly vedle tradičních lomových testů využity moderní metody 3D skenování, rastrovací elektronové mikroskopie, chemické analýzy pomocí elektronové mikrosondy a metod měření mechanických vlastností malých objemů – nanoindentace. V numerické části práce byly využity modely založené na zobecněné lineární elastické lomové mechanice i modely moderní určené pro simulace cementových kompozitů, konkrétně model rozetřených trhlin a mikroploškový (Microplane) model. V návaznosti na dosažených výsledcích byla práce doplněna i o kohezivní model simulující chování rozhraní. Výsledky jsou diskutovány a dány do kontextu s již publikovanými pracemi. Hlavním závěrem práce je, že vlastnosti přechodové oblasti nemají na chování cementových kompozitů takový vliv jako samotná adheze mezi inkluzí a přechodovou oblastí, potažmo matricí.cs
dc.description.abstractThe Interfacial Transition Zone (ITZ) between the aggregate grain/reinforcement bar and the matrix is considered to be the weakest element in cementitious composites and is, according to some authors, directly responsible for the nonlinear (more precisely, quasi-brittle) behavior of the composites. The aim of this work is verification of the generally accepted paradigm of the weakest element by means of fracture experiments and corresponding numerical simulations. In the experimental part, in addition to traditional fracture tests, modern methods of 3D scanning, scanning electron microscopy, chemical analysis using an electron microprobe and nanoindentation were used. In the numerical part, models based on generalized linear elastic fracture mechanics as well as modern models intended for the simulation of cement composites, namely crack band model with smeared cracks and the Microplane model, were used. Based on the results, the numerical part was complemented by the Cohesive Zone Material model simulating the behavior of the interface. All results are discussed and put into context with already published work. The main conclusion of the work is that the properties of the ITZ do not have such an influence on the behavior of cement composites as the adhesion between the inclusion and the ITZ, i.e. the matrix.en
dc.description.markPcs
dc.identifier.citationVYHLÍDAL, M. Porušování jemnozrnného cementového kompozitu v blízkosti rozhraní plniva a matrice [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2023.cs
dc.identifier.other154261cs
dc.identifier.urihttp://hdl.handle.net/11012/214438
dc.language.isocscs
dc.publisherVysoké učení technické v Brně. Fakulta stavebnícs
dc.rightsStandardní licenční smlouva - přístup k plnému textu bez omezenícs
dc.subjectCementový kompozitcs
dc.subjectinkluzecs
dc.subjectpřechodová oblast (ITZ)cs
dc.subjectlomový testcs
dc.subjecttříbodový ohybcs
dc.subjectlomová mechanikacs
dc.subjectnumerická simulacecs
dc.subjectmetoda konečných prvkůcs
dc.subjectnanoindentacecs
dc.subjectelektronová mikroskopie.cs
dc.subjectCement-based compositeen
dc.subjectinclusionen
dc.subjectthe Interfacial Transition Zone (ITZ)en
dc.subjectfracture testen
dc.subjectthree-point bendingen
dc.subjectfracture mechanicsen
dc.subjectnumerical simulationen
dc.subjectfinite element methoden
dc.subjectnanoindentationen
dc.subjectelectron microscopy.en
dc.titlePorušování jemnozrnného cementového kompozitu v blízkosti rozhraní plniva a matricecs
dc.typeTextcs
dc.type.driverdoctoralThesisen
dc.type.evskpdizertační prácecs
dcterms.dateAccepted2023-11-03cs
dcterms.modified2024-05-17-12:54:06cs
eprints.affiliatedInstitution.facultyFakulta stavebnícs
sync.item.dbid154261en
sync.item.dbtypeZPen
sync.item.insts2025.03.27 13:13:11en
sync.item.modts2025.01.15 16:23:25en
thesis.disciplineKonstrukce a dopravní stavbycs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav stavební mechanikycs
thesis.levelDoktorskýcs
thesis.namePh.D.cs
Files
Original bundle
Now showing 1 - 5 of 6
Loading...
Thumbnail Image
Name:
final-thesis.pdf
Size:
7.79 MB
Format:
Adobe Portable Document Format
Description:
final-thesis.pdf
Loading...
Thumbnail Image
Name:
thesis-1.pdf
Size:
8.98 MB
Format:
Adobe Portable Document Format
Description:
thesis-1.pdf
Loading...
Thumbnail Image
Name:
Posudek-Vedouci prace-VyhlidalMichal_stanovisko_skolitele.pdf
Size:
169.03 KB
Format:
Adobe Portable Document Format
Description:
Posudek-Vedouci prace-VyhlidalMichal_stanovisko_skolitele.pdf
Loading...
Thumbnail Image
Name:
Posudek-Oponent prace-POSUDEK Vyhlidal_ Kabele.pdf
Size:
288.6 KB
Format:
Adobe Portable Document Format
Description:
Posudek-Oponent prace-POSUDEK Vyhlidal_ Kabele.pdf
Loading...
Thumbnail Image
Name:
Posudek-Oponent prace-posudek_Vyhlidal_Profant2.pdf
Size:
279.46 KB
Format:
Adobe Portable Document Format
Description:
Posudek-Oponent prace-posudek_Vyhlidal_Profant2.pdf
Collections