Comparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Time

Simple item page
dc.contributor.authorFranke, Jakubcs
dc.contributor.authorKoutecký, Tomášcs
dc.contributor.authorKoutný, Danielcs
dc.coverage.issue18cs
dc.coverage.volume16cs
dc.date.accessioned2023-09-20T06:57:38Z
dc.date.available2023-09-20T06:57:38Z
dc.date.issued2023-09-11cs
dc.description.abstractThis study compared eight sublimation scanning sprays in terms of their effect on 3D scanning results, coating thickness, and sublimation time. The work used an automated spraying system to ensure the same deposition conditions for all tested materials. All experiments were performed under the same environmental conditions to exclude the influence of the ambient environment on the coatings. All tested scanning sprays created coatings with thicknesses in the order of tens of micrometers that were detectable by the 3D scanner Atos III Triple Scan. The coatings must be applied carefully when accurate measurements are required. All used materials enabled the capture of the highly reflective surface of the Si-wafer. However, the differences between some sprays were significant. Sublimation time measurements showed that all coatings disappeared from the Si-wafer surface completely. Nevertheless, all coatings left visible traces on the mirror-like surface. They were easily wiped off with a cloth.en
dc.formattextcs
dc.format.extent1-15cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationMaterials . 2023, vol. 16, issue 18, p. 1-15.en
dc.identifier.doi10.3390/ma16186165cs
dc.identifier.issn1996-1944cs
dc.identifier.orcid0000-0002-6540-9240cs
dc.identifier.orcid0000-0001-5793-4080cs
dc.identifier.orcid0000-0002-5384-8668cs
dc.identifier.other184623cs
dc.identifier.researcheridF-3858-2012cs
dc.identifier.researcheridF-8576-2012cs
dc.identifier.scopus23988874000cs
dc.identifier.urihttp://hdl.handle.net/11012/214092
dc.language.isoencs
dc.publisherMDPIcs
dc.relation.ispartofMaterialscs
dc.relation.urihttps://www.mdpi.com/1996-1944/16/18/6165cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1996-1944/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectoptical 3D scanningen
dc.subjectmatte coatingen
dc.subjectscanning sprayen
dc.subjectsublimation coatingen
dc.subjectcoating thicknessen
dc.titleComparison of Sublimation 3D Scanning Sprays in Terms of Their Effect on the Resulting 3D Scan, Thickness, and Sublimation Timeen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-184623en
sync.item.dbtypeVAVen
sync.item.insts2023.10.26 12:57:27en
sync.item.modts2023.10.26 12:15:15en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. ÚK-odbor reverzního inženýrství a aditivních technologiícs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
materials1606165v2.pdf
Size:
5.12 MB
Format:
Adobe Portable Document Format
Description:
materials1606165v2.pdf
Download
Collections
ÚK-odbor reverzního inženýrství a aditivních technologií