Fracture predictions in impact three-point bending test of European beech

dc.contributor.authorKubík, Petrcs
dc.contributor.authorŠebek, Františekcs
dc.contributor.authorHassan Vand, Mojtabacs
dc.contributor.authorBrabec, Martincs
dc.contributor.authorTippner, Jancs
dc.coverage.issue1cs
dc.coverage.volume70cs
dc.date.issued2024-08-31cs
dc.description.abstractHardwood has become widespread in European forests. The strongest factor is climate change and damage to conifers by the bark beetle. The effort to study hardwoods grows with increasing volume of applications. Therefore, European beech wood was investigated under two impact loads in two material directions, resulting in four unique combinations supplemented by the measurement of the friction coefficient. Then, it was computationally simulated to reproduce the cracking, while the material model reflected the orthotropic behaviour in elasticity, plasticity and failure. The model was coded using the user subroutine in Abaqus to initiate and propagate the crack using the element deletion. The resulting reaction forces were in good agreement with those from the experiments. Cracking was numerically simulated in three of four cases as experimentally observed, however, upon larger deflections. Therefore, the model is applicable for further investigations.en
dc.description.abstractTvrdé dřevo se stalo v evropských lesích rozšíření. Nejsilnějším faktorem je změna klimatu a poškození jehličnanů kůrovcem. Snaha studovat tvrdé dřevo roste se zvyšujícím se objemem aplikací. Proto byl dub evropský studován při dvou rázových zatíženích ve dvou materiálových směrech, vyúsťující ve čtyři unikátní kombinace doplněné o měření součinitele tření. Poté to bylo výpočtově simulováno pro reprodukci praskání, zatímco model materiálu odrážel ortotropní chování v elasticitě, plasticity a porušování. Model byl programovaný pomocí uživatelského podprogramu v Abaqusu pro iniciaci a šíření trhliny pomocí mazání prvků. Výsledné reakční síly byly v dobrém souladu s těmi z experimentů. Praskání bylo numericky simulováno ve třech případech ze čtyř, jak bylo experimentálně pozorováno, nicméně při větších průhybech. Tudíž model je aplikovatelný pro další výzkumy.cs
dc.formattextcs
dc.format.extent1-12cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationJOURNAL OF WOOD SCIENCE. 2024, vol. 70, issue 1, p. 1-12.en
dc.identifier.doi10.1186/s10086-024-02157-xcs
dc.identifier.issn1435-0211cs
dc.identifier.orcid0000-0003-1992-0563cs
dc.identifier.orcid0000-0003-3813-6555cs
dc.identifier.other189598cs
dc.identifier.researcheridA-1850-2017cs
dc.identifier.researcheridI-5694-2013cs
dc.identifier.scopus55163461900cs
dc.identifier.scopus57216287741cs
dc.identifier.urihttp://hdl.handle.net/11012/249522
dc.language.isoencs
dc.publisherSpringer Naturecs
dc.relation.ispartofJOURNAL OF WOOD SCIENCEcs
dc.relation.urihttps://jwoodscience.springeropen.com/articles/10.1186/s10086-024-02157-xcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1435-0211/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectAnisotropyen
dc.subjectBarlaten
dc.subjectDynamicen
dc.subjectExpliciten
dc.subjectFlexureen
dc.subjectRuptureen
dc.subjectAnizotropie
dc.subjectBarlat
dc.subjectdynamický
dc.subjectexplicitní
dc.subjectprohnutí
dc.subjectprasknutí
dc.titleFracture predictions in impact three-point bending test of European beechen
dc.title.alternativePredikce lomu při testu tříbodovým ohybem buku evropskéhocs
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
eprints.grantNumberinfo:eu-repo/grantAgreement/GA0/GA/GA23-04724Scs
sync.item.dbidVAV-189598en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:49:20en
sync.item.modts2025.01.17 15:29:06en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Ústav mechaniky těles, mechatroniky a biomechanikycs
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
s1008602402157x.pdf
Size:
3.95 MB
Format:
Adobe Portable Document Format
Description:
file s1008602402157x.pdf