Experimental Research on the Influence of Structural Modifications of Adherends on the Load - Bearing Capacity of Lap Joints of S235JR Steel Sheets

Simple item page
dc.contributor.authorZielecki, Władysławcs
dc.contributor.authorŁabno, Katarzynacs
dc.contributor.authorPerłowski, Ryszardcs
dc.contributor.authorBąk, Łukaszcs
dc.contributor.authorKatrňák, Tomášcs
dc.coverage.issue1cs
dc.coverage.volume40cs
dc.date.issued2023-01-12cs
dc.description.abstractThe paper presents the results of the research determining the impact of structural modifications of adherends on the load capacity of the joints determined in the static shear test. Tests of adhesive lap joints of S235JR steel sheets bonded with Araldite 2014-2 epoxy adhesive are described. The influence of technologically simple structural modifications was investigated, consisting in making notches and holes at the leading edge of the ad-herends. These modifications were aimed at bringing about local flexibility of the joint in the sensitive area of stress concentration. Based on experimental studies, it was shown that there is a possibility of increasing the load-bearing capacity of the joint due to the applied modifications, in the most favorable variant, an increase in the load-bearing capacity by 15.9% compared to the base variant was demonstrated. The tests confirmed that filled notches by the adhesive in the front part of the adherends can significantly improve the strength properties of joint, while the considered modifications in the form of holes do not have a significant impact on the proper-ties of the adherends.en
dc.formattextcs
dc.format.extent5-13cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationAdvances in Mechanical and Materials Engineering. 2023, vol. 40, issue 1, p. 5-13.en
dc.identifier.doi10.7862/rm.2023.1cs
dc.identifier.issn2956-4794cs
dc.identifier.orcid0000-0002-6213-3875cs
dc.identifier.other181453cs
dc.identifier.urihttp://hdl.handle.net/11012/209232
dc.language.isoencs
dc.publisherSciendocs
dc.relation.ispartofAdvances in Mechanical and Materials Engineeringcs
dc.relation.urihttps://journals.prz.edu.pl/amme/article/view/533cs
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 3.0 Unportedcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2956-4794/cs
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/cs
dc.subjectadhesive jointsen
dc.subjectstructural modificationen
dc.subjectstatic shear testen
dc.subjectS235JR steelen
dc.titleExperimental Research on the Influence of Structural Modifications of Adherends on the Load - Bearing Capacity of Lap Joints of S235JR Steel Sheetsen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-181453en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:47:31en
sync.item.modts2025.01.17 18:35:47en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Letecký ústavcs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
533Article Text164511020230113.pdf
Size:
931.53 KB
Format:
Adobe Portable Document Format
Description:
533Article Text164511020230113.pdf
Download
Collections
Letecký ústav