Ověření únosnosti střešní konstrukce po přitížení fotovoltaickými panely
but.jazyk | čeština (Czech) | |
but.program | Stavební inženýrství | cs |
but.result | práce byla úspěšně obhájena | cs |
dc.contributor.advisor | Strnad, Jiří | cs |
dc.contributor.author | Holoubek, Jan | cs |
dc.contributor.referee | Bažant,, Zdeněk | cs |
dc.date.created | 2012 | cs |
dc.description.abstract | Cílem bakalářské práce je ověření únosnosti střešní konstrukce po přitížení fotovoltaickými panely. Na střechu průmyslové haly obdélníkového půdorysu o rozměrech 26,5 x 24,5 m v Hlinsku se investor rozhodl dát fotovoltaické panely. Předběžný diagnostický průzkum prokázal pouze ohybovou výztuž v poli u všech posuzovaných nosných prvků. Posuzovány na únosnost v ohybu byly tyto nosné prvky: ŽB deska, ŽB trám a ŽB průvlak. Statický výpočet obsahuje i minimální vyztužení nad podporou a nutnou smykovou výztuž, kterou je nutno prokázat podrobným diagnostickým průzkumem. Statický výpočet obsahuje i posudek na průhyb ŽB trámu po přitížení. Všechny posudky byly prováděny dle momentálně platných Eurokódů. Výpočtem bylo prokázáno, že všechny nosné prvky vyhoví na únosnost v ohybu a průhyb trámu je menší než mezní hodnota uvedená v EC, tudíž střechu haly lze přitížit fotovoltaickými panely. | cs |
dc.description.abstract | The aim of the thesis is to verify the resistance of the roof structure loaded with photovoltaic panels. On the roof of industrial building of rectangular plan with dimensions of 26,5 x 24,5 m in Hlinsko, the investor decided to install photovoltaic panels. Preliminary diagnostic survey showed only flexural reinforcement in the field of all considered load-bearing elements. Bending strength was assessed by these structural elements: reinforced concrete slab, reinforced concrete beam, reinforced concrete grinder. Static calculation includes a minimum reinforcement of support and necessary shear reinforcement, which must be demonstrated by a detailed diagnostic survey. The structural analysis includes the assessment of reinforced concrete beam deflection after loading. All assessments were performed according to currently valid Eurocodes. The calculation showed that all supporting elements meet the bending resistance and deflection of the beam is smaller than the limit value laid down in the EC, so the roof of the hall can be loaded with photovoltaic panels. | en |
dc.description.mark | B | cs |
dc.identifier.citation | HOLOUBEK, J. Ověření únosnosti střešní konstrukce po přitížení fotovoltaickými panely [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2012. | cs |
dc.identifier.other | 58943 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/9553 | |
dc.language.iso | cs | cs |
dc.publisher | Vysoké učení technické v Brně. Fakulta stavební | cs |
dc.rights | Standardní licenční smlouva - přístup k plnému textu bez omezení | cs |
dc.subject | Beton | cs |
dc.subject | železobeton | cs |
dc.subject | fotovoltaický panel | cs |
dc.subject | ohybová výztuž | cs |
dc.subject | smyková výztuž | cs |
dc.subject | deska | cs |
dc.subject | trám | cs |
dc.subject | průvlak | cs |
dc.subject | mezní stav únosnosti | cs |
dc.subject | mezní stav použitelnosti | cs |
dc.subject | tuhost | cs |
dc.subject | Concrete | en |
dc.subject | reinforced concrete | en |
dc.subject | photovoltaic panel | en |
dc.subject | flexural reinforcement | en |
dc.subject | shear reinforcement | en |
dc.subject | slab | en |
dc.subject | beam | en |
dc.subject | girder | en |
dc.subject | ultimate limit state design | en |
dc.subject | serviceability limit state design | en |
dc.subject | stiffness | en |
dc.title | Ověření únosnosti střešní konstrukce po přitížení fotovoltaickými panely | cs |
dc.title.alternative | Resistance of the roof structure loaded with photovoltaic panels | en |
dc.type | Text | cs |
dc.type.driver | bachelorThesis | en |
dc.type.evskp | bakalářská práce | cs |
dcterms.dateAccepted | 2012-06-14 | cs |
dcterms.modified | 2012-06-21-15:37:58 | cs |
eprints.affiliatedInstitution.faculty | Fakulta stavební | cs |
sync.item.dbid | 58943 | en |
sync.item.dbtype | ZP | en |
sync.item.insts | 2025.03.22 14:14:51 | en |
sync.item.modts | 2025.01.15 17:09:56 | en |
thesis.discipline | Konstrukce a dopravní stavby | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta stavební. Ústav betonových a zděných konstrukcí | cs |
thesis.level | Bakalářský | cs |
thesis.name | Bc. | cs |
Files
Original bundle
1 - 3 of 3
Loading...
- Name:
- final-thesis.pdf
- Size:
- 3.9 MB
- Format:
- Adobe Portable Document Format
- Description:
- final-thesis.pdf
Loading...
- Name:
- review_58943.html
- Size:
- 1.46 KB
- Format:
- Hypertext Markup Language
- Description:
- file review_58943.html