Pevnostní analýza řezných nástrojů
Loading...
Date
Authors
Petrlíková, Helena
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato práce je zaměřena na deformačně napěťovou analýzu řezného nástroje. V úvodu je provedena rešeršní studie dostupné literatury a odborných článků zaměřené na témata souvisejícím s řešením. Řešení deformace a napjatosticelé soustavy bylo provedeno na základě výpočtového modelování pomocí metody konečných prvků MKP. Práce obsahuje detailní popis tvorby výpočtové modelu. Model geometrie soustavy byl vytvořen v programovém prostředí SolidWorks. Výpočtové modelování včetně vlastního řešení bylo provedeno v programovém systému ANSYS Workbench a ANSYS 12.0. Součástí této práce je prezentace výsledků a následná deformační a napěťová analýza řezného nástroje. Poslední část práce se zabývá modální a harmonickou analýzou řezného nástroje provedenou v programovém prostředí ANSYS Workbench.
This work is focused on the stress-strain analysis of a cutting tool. At the beginning, the study of available literature and scientific articles relating the topic is carried out. The solution of stresses and strains in whole real system has been carried out based on the computational simulation using the finite element method (FEM). The work contains a detailed description of the creation of the computational model. Model of geometry of the system has been created in the SolidWorks program. Computational simulation including the solution was implemented in the ANSYS Workbench program as well as in the classical environment of ANSYS 12.0. This work includes the presentation of results and subsequent stress-strain analysis of the cutting tool. Last part of this work deals with the modal analysis and harmonic analysis of cutting tools made in classical environment of ANSYS program.
This work is focused on the stress-strain analysis of a cutting tool. At the beginning, the study of available literature and scientific articles relating the topic is carried out. The solution of stresses and strains in whole real system has been carried out based on the computational simulation using the finite element method (FEM). The work contains a detailed description of the creation of the computational model. Model of geometry of the system has been created in the SolidWorks program. Computational simulation including the solution was implemented in the ANSYS Workbench program as well as in the classical environment of ANSYS 12.0. This work includes the presentation of results and subsequent stress-strain analysis of the cutting tool. Last part of this work deals with the modal analysis and harmonic analysis of cutting tools made in classical environment of ANSYS program.
Description
Keywords
Stopková fréza, model geometrie, model zatížení, model vazeb, deformační a napěťová analýza, metoda konečných prvků MKP, modální analýza, vlastní frekvence, vlastní tvary kmitů, harmonická analýza., Shank mill, model geometry, load model, bonduary condition, deformation and stress analysis, finite element method FEM, modal analysis, natural frequency, own wave kapes, harmonic analysis.
Citation
PETRLÍKOVÁ, H. Pevnostní analýza řezných nástrojů [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2010.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie a průmyslový management
Comittee
prof. Ing. Miroslav Píška, CSc. (předseda)
doc. Ing. Vladimír Chalupský, CSc., MBA (místopředseda)
prof. Ing. Ľubomír Šooš, Ph.D. (člen)
doc. Ing. Ľubomír Javorek, CSc. (člen)
Ing. Ivana Groligová, CSc. (člen)
Dr. Ing. Rostislav Suchánek (člen)
Date of acceptance
2010-06-24
Defence
Diplomant seznámil komisi s obsahem a výsledky své diplomové práce a zodpověděl dotazy vedoucího, oponenta a dalších členů komise.
V průběhu obhajoby byly položeny ještě následující dotazy:
Vy jste použila teorii HMH. Tato teorie uvažuje sigma 2. Uvažovala jste napětí sigma 2?
Uvažovala jste, že upínač je absolutně tuhé těleso.
Jak je to ve skutečnosti s většinou upínačů?
V prezentaci máte obrázek se silovým zatížením. Mohla byste ukázat kde je v obrázku řezná síla?
Diplomant zodpověděl dotazy všech členů komise.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení