The influence of the addition of gypsum on some selected properties of lime-metakaolin mortars

dc.contributor.authorMajerová, Janacs
dc.contributor.authorDrochytka, Rostislavcs
dc.coverage.issue1cs
dc.coverage.volume385cs
dc.date.issued2018-07-16cs
dc.description.abstractThe renovation and replacement of historical plasters is still a very current topic. Today’s trend is for the production of dry mortar mixtures that can be used for the renovation of historic buildings. The article therefore focuses on the preparation of gypsum-modified lime-metakaolin mortar. An experiment consisted of two stages. In the first stage of the experiment, the basic technological properties of fresh and hardened mortars were examined (bulk density of fresh and hardener mortar, compressive and flexural strength). The second stage aimed at monitoring the hydration process in different environments. Environments should simulate real factors affecting the plaster (humidity, low and higher temperatures). To determinate of the phase composition, the X-ray diffraction analysis was used. The results showed that gypsum in the lime-metakaolin plaster caused an increase in compressive and flexural strength. The presence of gypsum also conduced to the formation of ettringite and this has caused volumetric changes.en
dc.description.abstractThe renovation and replacement of historical plasters is still a very current topic. Today’s trend is for the production of dry mortar mixtures that can be used for the renovation of historic buildings. The article therefore focuses on the preparation of gypsum-modified lime-metakaolin mortar. An experiment consisted of two stages. In the first stage of the experiment, the basic technological properties of fresh and hardened mortars were examined (bulk density of fresh and hardener mortar, compressive and flexural strength). The second stage aimed at monitoring the hydration process in different environments. Environments should simulate real factors affecting the plaster (humidity, low and higher temperatures). To determinate of the phase composition, the X-ray diffraction analysis was used. The results showed that gypsum in the lime-metakaolin plaster caused an increase in compressive and flexural strength. The presence of gypsum also conduced to the formation of ettringite and this has caused volumetric changes.en
dc.formattextcs
dc.format.extent1-6cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationIOP Conference Series: Materials Science and Engineering. 2018, vol. 385, issue 1, p. 1-6.en
dc.identifier.doi10.1088/1757-899X/385/1/012034cs
dc.identifier.issn1757-899Xcs
dc.identifier.orcid0000-0001-7391-7838cs
dc.identifier.orcid0000-0002-7123-1338cs
dc.identifier.other149558cs
dc.identifier.researcheridAAX-1518-2020cs
dc.identifier.scopus36454745200cs
dc.identifier.urihttp://hdl.handle.net/11012/137182
dc.language.isoencs
dc.publisherIOP Publishingcs
dc.relation.ispartofIOP Conference Series: Materials Science and Engineeringcs
dc.relation.urihttp://iopscience.iop.org/article/10.1088/1757-899X/385/1/012034cs
dc.rightsCreative Commons Attribution 3.0 Unportedcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1757-899X/cs
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/cs
dc.subjectHistoric mortaren
dc.subjectmetakaolinen
dc.subjectlimeen
dc.subjectgypsumen
dc.subjectettringiteen
dc.subjectHistoric mortar
dc.subjectmetakaolin
dc.subjectlime
dc.subjectgypsum
dc.subjectettringite
dc.titleThe influence of the addition of gypsum on some selected properties of lime-metakaolin mortarsen
dc.title.alternativeThe influence of the addition of gypsum on some selected properties of lime-metakaolin mortarsen
dc.type.driverconferenceObjecten
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-149558en
sync.item.dbtypeVAVen
sync.item.insts2025.10.14 14:14:52en
sync.item.modts2025.10.14 10:16:23en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav technologie stavebních hmot a dílcůcs
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Technologie hmot a dílců AdMaScs

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Majerova_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012034.pdf
Size:
1.17 MB
Format:
Adobe Portable Document Format
Description:
file Majerova_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012034.pdf