Variabilní konferenční sál ČKAIT v Praze
Loading...
Date
Authors
Hudečková, Miriama
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Úlohou bakalárskej práce bolo zamerať sa na technickú stránku architektonickej štúdie, ktorá bola rozpracovaná v letnom semestri 3. ročníka ako ateliér zameraný na interiér. Bakalárska práca poskytuje výkresy do Dokumentácie pre stavebné povolenie a Dokumentácie pre uskutočnenie stavby. Témou práce je Variabilní konferenční sál v Prahe, ktorý by mal slúžiť ako hlavný sál pre Českú komoru autorizovaných inžinierov a technikov činných vo výstavbe. Stávajúca budova sa nachádza v Prahe na Sokolskej ulici, vo vnútrobloku má k dispozícii dve parcely určené pre stavbu tohto variabilného konferenčného sálu. Pôvodná budova obsahuje len jednu menšiu sálu, ktorá nevyhovuje z hľadiska kapacity. Cieľom tohto projektu je navrhnúť sálu pre 250 osôb a bezkolízne napojenie k pôvodnej budove. V stávajúcej budove došlo k zmenám otvorov, priečok ale taktiež k zmene podlahy a úrovni prvého podlažia, ktoré boli nevyhnutné k plynulej prevádzke konferenčnej sály. Súčasťou projektu bolo navrhnúť okrem variabilnej konferenčnej sály taktiež pridružené miestnosti sály, akými sú recepcia v stávajúcej budove hneď po vstupe do objektu a šatňa susediaca s už zmienenou recepciou. Ďalším dôležitým prvkom prístavby je foyer nachádzajúce sa v prízemí a nadväzujúce na vstupný priestor. Hygienické zariadenia sú prístupné z foyer prostredníctvom menšej chodby. Z foyer sú priamo prístupné catering a knižnica, ktorá je umiestnená v stávajúcej budove. Nasleduje variabilná sála a z nej prístupy do miestnosti zvukára, miestnosti vyhradenej a slúžiacej pre prípravu prednášajúceho, skladu stoličiek, technického zázemia budovy a taktiež nevyhnutný požiarny únik na susednú parcelu. Foyer pokračuje na druhé nadzemné podlažie, kde nájdeme predajňu, slúžiacu pre rôzne stretnutia odborníkov. Z druhého podlažia foyer je možné vojsť do galérie umiestnenej nad hlavnou sálou.
In my bachelor thesis I´m focusing on technical aspect of architectural studies, which was elaborated in a summer term of third class as a studio focusing on interior. Bachelor thesis provides drawing for Documentation for building permit and Documentation for the realization of construction. The topic is Variable conference hall in Prague, which should be used as a main hall for czech chamber certified engineers and technicians active in construction. An existing building is situated in Prague at Sokolská street, there are two parcels in the courtyard available to build this variable conference hall. Original building has only one small hall, which is not suitable because of a capacity. The aim of this project is to design a hall for 250 people, which will be connected to the original building without any collision. There has been changed holes, partition walls also floor and level of a first floor in the original building, which was necessary for smooth using of a conference hall. As a part of the project is to design also an associated rooms to a hall like reception in the original building, just in the entrance of the building and a dressing room just next to it. A next of important element of extension is a foyer situated on the ground floor and connects to the entrance hall. Access to a sanitary facilities is from a foyer across a small corridor. From a foyer there is an access to a catering and a library, which is situated in the original building. There is following the variable hall, where is the access to the room of a sound engineer. This room is reserved for a preparation for a speaker, to store a chairs, technical facilities of the building and also a necessary fire escape to the neighbor parcel. Foyer continues to the second floor, where we can find a shop, here experts mostly meet the others. From a second floor of the foyer is possible to entre to the gallery situated just above a main hall.
In my bachelor thesis I´m focusing on technical aspect of architectural studies, which was elaborated in a summer term of third class as a studio focusing on interior. Bachelor thesis provides drawing for Documentation for building permit and Documentation for the realization of construction. The topic is Variable conference hall in Prague, which should be used as a main hall for czech chamber certified engineers and technicians active in construction. An existing building is situated in Prague at Sokolská street, there are two parcels in the courtyard available to build this variable conference hall. Original building has only one small hall, which is not suitable because of a capacity. The aim of this project is to design a hall for 250 people, which will be connected to the original building without any collision. There has been changed holes, partition walls also floor and level of a first floor in the original building, which was necessary for smooth using of a conference hall. As a part of the project is to design also an associated rooms to a hall like reception in the original building, just in the entrance of the building and a dressing room just next to it. A next of important element of extension is a foyer situated on the ground floor and connects to the entrance hall. Access to a sanitary facilities is from a foyer across a small corridor. From a foyer there is an access to a catering and a library, which is situated in the original building. There is following the variable hall, where is the access to the room of a sound engineer. This room is reserved for a preparation for a speaker, to store a chairs, technical facilities of the building and also a necessary fire escape to the neighbor parcel. Foyer continues to the second floor, where we can find a shop, here experts mostly meet the others. From a second floor of the foyer is possible to entre to the gallery situated just above a main hall.
Description
Citation
HUDEČKOVÁ, M. Variabilní konferenční sál ČKAIT v Praze [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2017.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Architektura pozemních staveb
Comittee
Date of acceptance
2017-06-06
Defence
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení