Experimental assessment of steel fibre reinforced concretes with different concentrations of fibres
dc.contributor.author | Komárková, Tereza | cs |
dc.contributor.author | Láník, Jaromír | cs |
dc.contributor.author | Topolář, Libor | cs |
dc.contributor.author | Štoller, Jiří | cs |
dc.contributor.author | Stoniš, Patrik | cs |
dc.coverage.issue | 1 | cs |
dc.coverage.volume | 385 | cs |
dc.date.accessioned | 2018-08-20T10:48:43Z | |
dc.date.available | 2018-08-20T10:48:43Z | |
dc.date.issued | 2018-07-16 | cs |
dc.description.abstract | At present, steel fiber reinforced concrete can be classified as a composite material commonly used for load-bearing building structures. Adding steel fibers to fresh mixture improves its mechanical properties in comparison to plain concrete. The problem is, however, the production technology, which has not been standardized by regulations so far, and thus, proposals for the amount of steel fibers added to the mixture are still based on the long-term experience and performed tests. The paper describes an experiment focused on the determination and assessment of mechanical properties of steel fiber reinforced concretes with high concentrations of fibers. To better understand the behavior of test specimens during the three-point bending test, the acoustic emission method was used, which is able to capture active defects. | en |
dc.format | text | cs |
dc.format.extent | 1-6 | cs |
dc.format.mimetype | application/pdf | cs |
dc.identifier.citation | IOP Conference Series: Materials Science and Engineering. 2018, vol. 385, issue 1, p. 1-6. | en |
dc.identifier.doi | 10.1088/1757-899X/385/1/012028 | cs |
dc.identifier.issn | 1757-8981 | cs |
dc.identifier.other | 149039 | cs |
dc.identifier.uri | http://hdl.handle.net/11012/84124 | |
dc.language.iso | en | cs |
dc.publisher | IOP Publishing | cs |
dc.relation.ispartof | IOP Conference Series: Materials Science and Engineering | cs |
dc.relation.uri | http://iopscience.iop.org/article/10.1088/1757-899X/385/1/012028/pdf | cs |
dc.rights | Creative Commons Attribution 3.0 Unported | cs |
dc.rights.access | openAccess | cs |
dc.rights.sherpa | http://www.sherpa.ac.uk/romeo/issn/1757-8981/ | cs |
dc.rights.uri | http://creativecommons.org/licenses/by/3.0/ | cs |
dc.subject | steel fiber ereinforced concrete | en |
dc.subject | three-point bending test | en |
dc.subject | acoustic emission method | en |
dc.title | Experimental assessment of steel fibre reinforced concretes with different concentrations of fibres | en |
dc.type.driver | conferenceObject | en |
dc.type.status | Peer-reviewed | en |
dc.type.version | publishedVersion | en |
sync.item.dbid | VAV-149039 | en |
sync.item.dbtype | VAV | en |
sync.item.insts | 2020.04.01 11:00:50 | en |
sync.item.modts | 2020.04.01 05:53:15 | en |
thesis.grantor | Vysoké učení technické v Brně. Fakulta stavební. Ústav stavebního zkušebnictví | cs |
thesis.grantor | Vysoké učení technické v Brně. Fakulta stavební. Ústav fyziky | cs |
Files
Original bundle
1 - 1 of 1
Loading...
- Name:
- Komarkova_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012028.pdf
- Size:
- 1.01 MB
- Format:
- Adobe Portable Document Format
- Description:
- Komarkova_2018_IOP_Conf._Ser.__Mater._Sci._Eng._385_012028.pdf