Experiences with using of loading tests and the “Design assisted by testing” method for the determination and verification of structural members and details

Simple item page
dc.contributor.authorŠtrba, Michalcs
dc.contributor.authorKarmazínová, Marcelacs
dc.contributor.authorBukovská, Pavlacs
dc.coverage.issue1cs
dc.coverage.volume15cs
dc.date.accessioned2021-12-08T07:54:06Z
dc.date.available2021-12-08T07:54:06Z
dc.date.issued2021-01-04cs
dc.description.abstractThis paper describes experiences with use of different types of experiments (i.e. loading tests) as well as with use of so-called “Design assisted by testing” method given in the standard “Eurocode 1”. Both these mentioned ways are useful in case of a determination and verification of important design parameters, material properties and load-carrying capacities (in case of different types of stresses, used materials or geometric configurations of designed constructions or their elements and details). In this area, during recent years, large number of miscellaneous loading tests have been performed at the authors’ workplace. Therefore, all presented information and all described experiment results in this article are directly based on solved experimental (and theoretical) research programs carried out at Institute of Metal and Timber Structures at the Faculty of Civil Engineering at Brno University of Technology in cooperation with research institutes and companies in the Czech Republic. Most of all research projects were focused on the load-carrying capacity determination as well as on the knowledge about an actual behaviour and failure mechanisms of steel and steel-concrete structural members and details (recently of members made of FRP or GFRP composite, too), usually in case of verification of either existing or newly designed building or bridge structures.en
dc.formattextcs
dc.format.extent1-11cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationInternational Journal of Mechanics. 2021, vol. 15, issue 1, p. 1-11.en
dc.identifier.doi10.46300/9104.2021.15.1cs
dc.identifier.issn1998-4448cs
dc.identifier.other167546cs
dc.identifier.urihttp://hdl.handle.net/11012/203108
dc.language.isoencs
dc.publisherNorth Atlantic University Unioncs
dc.relation.ispartofInternational Journal of Mechanicscs
dc.relation.urihttps://www.naun.org/main/NAUN/mechanics/2021/a022003-001(2021).pdfcs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/1998-4448/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectdesign assisted by testingen
dc.subjectdesign characteristicsen
dc.subjectexperimentsen
dc.subjectload-carrying capacity determinationen
dc.subjectloading testsen
dc.subjectsteel constructionsen
dc.subjectparameters verificationen
dc.titleExperiences with using of loading tests and the “Design assisted by testing” method for the determination and verification of structural members and detailsen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-167546en
sync.item.dbtypeVAVen
sync.item.insts2021.12.08 08:54:06en
sync.item.modts2021.12.08 08:14:16en
thesis.grantorVysoké učení technické v Brně. Fakulta stavební. Ústav kovových a dřevěných konstrukcícs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
a0220030012021.pdf
Size:
2.88 MB
Format:
Adobe Portable Document Format
Description:
a0220030012021.pdf
Download
Collections
Ústav kovových a dřevěných konstrukcí