Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers

Simple item page
dc.contributor.authorHnízdil, Milancs
dc.contributor.authorChabičovský, Martincs
dc.contributor.authorRaudenský, Miroslavcs
dc.contributor.authorLee, Tae-Woocs
dc.coverage.issue3cs
dc.coverage.volume4cs
dc.date.issued2016-07-27cs
dc.description.abstractWe present a new Nusselt number correlation for spray cooling at large Reynolds numbers and high surface temperatures for water sprays impinging perpendicularly onto a flat plate. A large set of experimental data on spray cooling of hot surfaces with water has been analyzed, including the water temperature effects. For large-scale cooling, such as in industrial processes, large number of injection parameters such as number, type, pressure, and angle of the spray injection has led to a multitude of correlations that are difficult for general and practical applications. However, by synthesizing a set of experimental data where all of the above parameters have been varied, we find that the Nusselt number and therefore the heat transfer coefficient can be cast accurately as a function of the Reynolds number. Water is widely used as the coolant during spray cooling, and has a specific phase change characteristic. At large Reynolds number (Re > 100,000) and surface temperature (Ts > 600°C) ranges, which are of interest in large-scale spray cooling, the effect of water temperature is quite significant as it affects the film boiling close to the surface. This effect also has been parameterized using experimental data.en
dc.formattextcs
dc.format.extent104-113cs
dc.format.mimetypeapplication/pdfcs
dc.identifier.citationJournal of Flow Control, Measurement & Visualization. 2016, vol. 4, issue 3, p. 104-113.en
dc.identifier.doi10.4236/jfcmv.2016.43010cs
dc.identifier.issn2329-3330cs
dc.identifier.orcid0000-0003-1657-5186cs
dc.identifier.orcid0000-0002-6725-6188cs
dc.identifier.orcid0000-0001-7116-9274cs
dc.identifier.other140001cs
dc.identifier.researcheridC-2414-2018cs
dc.identifier.researcheridJ-9795-2014cs
dc.identifier.researcheridG-9625-2015cs
dc.identifier.scopus37020261100cs
dc.identifier.scopus57194432373cs
dc.identifier.scopus57216709671cs
dc.identifier.urihttp://hdl.handle.net/11012/204298
dc.language.isoencs
dc.publisherScientific Research publishingcs
dc.relation.ispartofJournal of Flow Control, Measurement & Visualizationcs
dc.relation.urihttp://www.scirp.org/journal/PaperInformation.aspx?PaperID=69089cs
dc.rightsCreative Commons Attribution 4.0 Internationalcs
dc.rights.accessopenAccesscs
dc.rights.sherpahttp://www.sherpa.ac.uk/romeo/issn/2329-3330/cs
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/cs
dc.subjectImpinging Flowen
dc.subjectSpray Coolingen
dc.subjectHeat Transferen
dc.subjectMeasurementsen
dc.titleHeat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbersen
dc.type.driverarticleen
dc.type.statusPeer-revieweden
dc.type.versionpublishedVersionen
sync.item.dbidVAV-140001en
sync.item.dbtypeVAVen
sync.item.insts2025.02.03 15:47:26en
sync.item.modts2025.01.17 18:48:41en
thesis.grantorVysoké učení technické v Brně. Fakulta strojního inženýrství. Laboratoř přenosu tepla a prouděnícs
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
JFCMV_2016072711204377.pdf
Size:
937.82 KB
Format:
Adobe Portable Document Format
Description:
JFCMV_2016072711204377.pdf
Download
Collections
Laboratoř přenosu tepla a proudění