Inteligentní LED světlo
Loading...
Date
Authors
ORCID
Advisor
Referee
Mark
F
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Cílem bakalářské práce je navrhnout a realizovat prototyp inteligentního LED osvětlení s možností míchání barev studené bílé, teplé bílé, červené, zelené a modré barvy. Vytvořit komunikaci, ovládácí jednotky včetně W(LAN) jednotky, která bude umožňovat komunikaci mimo tuto uzavřenou sběrnici. V práci je prvně popsáno světlo a jeho historie. Návrh samotného zařízení se skládá z 3D modelu prototypu LED osvětlení zabudovaného ve stropě a následného výběru konkrétních použitých obvodů. Při návrhu bylo dbáno na nedostatky dnešních chytrých elektroinstalací. V závěru práce je popsána problematika ruční osazení desek plošných spojů a výsledky měření navržených LED budičů.
The aim of the bachelor thesis is to design and implement a prototype of intelligent LED lighting with the possibility of mixing cold white, warm white, red, green and blue colours. To create communication, control units including a W(LAN) unit that will allow communication outside this closed bus. This thesis is the first to describe light and its history. The design of the device itself consists of a 3D model of a prototype LED light embedded in the ceiling, followed by the selection of the specific circuits used. In the design, the shortcomings of today’s smart wiring systems were taken into account. The thesis concludes with a description of the hand-fitting of the circuit boards and the measurement results of the designed LED exciters.
The aim of the bachelor thesis is to design and implement a prototype of intelligent LED lighting with the possibility of mixing cold white, warm white, red, green and blue colours. To create communication, control units including a W(LAN) unit that will allow communication outside this closed bus. This thesis is the first to describe light and its history. The design of the device itself consists of a 3D model of a prototype LED light embedded in the ceiling, followed by the selection of the specific circuits used. In the design, the shortcomings of today’s smart wiring systems were taken into account. The thesis concludes with a description of the hand-fitting of the circuit boards and the measurement results of the designed LED exciters.
Description
Citation
KREJČÍ, M. Inteligentní LED světlo [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2021.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
bez specializace
Comittee
prof. Dr. Ing. Zbyněk Raida (předseda)
doc. Ing. Roman Šotner, Ph.D. (místopředseda)
prof. Ing. Milan Sigmund, CSc. (člen)
Ing. Peter Barcík, Ph.D. (člen)
Ing. Zbyněk Lukeš, Ph.D. (člen)
Date of acceptance
2021-08-26
Defence
Student prezentuje výsledky a postupy řešení své diplomové práce. Následně odpovídá na dotazy vedoucího a oponenta práce a na dotazy členů zkušební komise:
Student demonstruje funkci své bakalářské práce.
Odpovídá na dotaz oponenta: že mu mnoho času zabrala implementace komunikace s ethernetem.
Ing. Zbyněk Lukeš, Ph.D.: dotaz na použité tranzistory: diskuze se studentem o výkonových tranzistorech, dotaz na tekoucí proudy, student odpovídá.
Result of defence
práce nebyla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení