Studium tepelných vlastností materiálů pro 3D tisk
Loading...
Date
Authors
Lapčíková, Tereza
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta chemická
Abstract
Cílem bakalářské práce bylo prostudovat tepelné vlastnosti materiálů používaných pro 3D tisk (tzv. filamentů) a to zejména kyselinu polymléčnou (PLA). V rámci teoretické části byla vypracována rešerše popisující některé metody 3D tisku a souhrn materiálů vhodných k tomuto účelu. Zejména jsme se zaměřili na přípravu PLA, její chemické, fyzikální a tepelné vlastnosti a její využití při 3D tisku, například v biomedicínských aplikacích. V experimentální části byly technikou 3D tisku připraveny vzorky PLA o různých tloušťkách a byly studovány tepelné vlastnosti především měrná tepelná kapacita a měrná tepelná vodivost. Bylo zjištěno, že měrná tepelná vodivost studovaných materiálů je 0,128 W/m/K a měrná tepelná kapacita 1335 J/kg/K. Tyto hodnoty odpovídají tabelovaným hodnotám uvedeným v literatuře, z čehož lze usoudit, že metodu popsanou v této práci lze použít ke studiu tepelných vlastností objemových materiálů.
The aim of this bachelor thesis was to study thermal properties of materials used for 3D printing (so-called filaments), especially a polylactic acid (PLA). Within the theoretical part there was performed the literature review focused on the description of different methods of 3D printing including the summary of suitable materials for these technologies. In particular, we focused on the preparation of PLA, its summarization of its chemical, physical and thermal properties and its practical use in 3D additive printing manufacturing, e.g. in biomedical applications. In the experimental part, PLA samples of different thicknesses were prepared by 3D printing technique and thermal properties such as thermal capacity and thermal conductivity were determined. It was found that thermal conductivity of studied material was 0,128 W/m/K and specific heat capacity 1335 J/kg/K. These values corresponded to the once given in the literature.
The aim of this bachelor thesis was to study thermal properties of materials used for 3D printing (so-called filaments), especially a polylactic acid (PLA). Within the theoretical part there was performed the literature review focused on the description of different methods of 3D printing including the summary of suitable materials for these technologies. In particular, we focused on the preparation of PLA, its summarization of its chemical, physical and thermal properties and its practical use in 3D additive printing manufacturing, e.g. in biomedical applications. In the experimental part, PLA samples of different thicknesses were prepared by 3D printing technique and thermal properties such as thermal capacity and thermal conductivity were determined. It was found that thermal conductivity of studied material was 0,128 W/m/K and specific heat capacity 1335 J/kg/K. These values corresponded to the once given in the literature.
Description
Citation
LAPČÍKOVÁ, T. Studium tepelných vlastností materiálů pro 3D tisk [online]. Brno: Vysoké učení technické v Brně. Fakulta chemická. 2021.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Spotřební chemie
Comittee
prof. Ing. Martina Klučáková, Ph.D. (předseda)
prof. Ing. Michal Veselý, CSc. (místopředseda)
doc. Ing. Zdenka Kozáková, Ph.D. (člen)
doc. Ing. Filip Mravec, Ph.D. (člen)
prof. Ing. Ladislav Omelka, DrSc. (člen)
prof. Mgr. Martin Vala, Ph.D. (člen)
Date of acceptance
2021-08-27
Defence
Obhajoba proběhla podle následujícího schématu: prezentace studentky-vyjádření vedoucí/ho-oponentský posudek-reakce na posudek-diskuse s komisí. Studentka přednesla výborný výtah výsledků své bakalářské práce, řádně zodpověděla všechny dotazy oponentské i členů komise, pohotově reagovala na připomínky. V diskusi tak studentka prokázala výbornou schopnost orientace v teoretických i praktických základech problematiky bakalářské práce. Komise zhodnotila její bakalářskou práci celkově jako výbornou.
Klučáková – Jaký je rozdíl mezi měrnou tepelnou kapacitou a kapacitancí? Mluvila jste o exponenciálním poklesu měrné tepelné kapacity, proč není proložená křivka exponenciálou?
Mravec – Proč měrná tepelná kapacita klesá s tloušťkou vzorku?
Veselý – Jak se výsledky měření dají zužitkovat při 3D tisku?
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení