Návrh konstrukce mobilního autonomního robotu

Loading...
Thumbnail Image

Date

Authors

Vodrážka, Jakub

Mark

B

Journal Title

Journal ISSN

Volume Title

Publisher

Vysoké učení technické v Brně. Fakulta strojního inženýrství

ORCID

Abstract

Tato diplomová práce se zabývá návrhem konstrukce prostředku pro testování lokalizačních metod pro indoor navigaci. Jako vhodný prostředek pro testování byl navržen autonomní robot. Práce je rozdělena do tří částí. V první části je popsáno rozdělení robotů, jejich možné využití a jsou zde také uvedeny použitelné snímače při řešení tohoto problému. Druhá část pojednává o návrhu a konstrukci robotu. Ten je postaven na podvozku diferenciálního typu s opěrnou ostruhou. Jako pohonné jednotky slouží dva elektromotory s převodovkou a snímačem otáček výstupní hřídele. Plášť robotu byl navržen s ohledem na jeho funkčnost, ale i celkový vzhled. Robot má zároveň sloužit pro prezentaci robotiky. Konstrukce zahrnuje také návrh řídící jednotky a snímačů. V poslední části je popsán statistický model pohybu robotu, v rámci kterého bylo provedeno několik experimentů. Ty měly za úkol zjistit případné odchylky při měření pohybu snímači robotu od skutečnosti.
The thesis deals with design of the device for testing the localization techniques for indoor navigation. Autonomous robot was designed as the most appropriate platform for testing. The thesis is divided into three parts. The first one describes various kinds of robots, their possible use and sensors, which could be of use for solving the problem. The second part deals with the design and construction of the robot. The robot is built on the chassis of the differential type with support spur. Two electric motors with a gearbox and output shaft speed sensor represent the drive unit. Coat of the robot was designed for good functionality and attractive overall look. The robot is also used for the presentation of robotics. Thesis provides complete design of chassis and body construction, along with control section and sensorics. The last part describes a statistical model of the robot movement, which was based on several performed experiments. The experiments were realized to find any possible deviations of sensor measurement comparing to the real situation.

Description

Citation

VODRÁŽKA, J. Návrh konstrukce mobilního autonomního robotu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2010.

Document type

Document version

Date of access to the full text

Language of document

cs

Study field

Aplikovaná informatika a řízení

Comittee

prof. Ing. Vladimír Vašek, CSc. (předseda) prof. Ing. Jiří Tůma, CSc. (místopředseda) prof. Ing. Pavel Ošmera, CSc. (člen) Prof.Ing.Tomáš Saloky,CSc. (člen) Doc.Ing.Eva Kureková,CSc. (člen) Doc.Ing.Ondrej Liška,CSc. (člen)

Date of acceptance

2010-06-14

Defence

Result of defence

práce byla úspěšně obhájena

DOI

Collections

Endorsement

Review

Supplemented By

Referenced By

Citace PRO