Comparison of Taguchi’s partial correction technique with control charts
Loading...
Date
2015-10-01
Authors
Kotek, Luboš
Nosek, Aleš
Fiala, Alois
Zahálka, Jiří
0000-0002-2899-4532Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
MM publishing Ltd.
Altmetrics
Abstract
This article compares the most commonly used methods of statistical quality control (control charts - in our case the control chart of individual values) with the Taguchi’s method of Partial Correction. The comparison applies to an actual process of hole reaming, and a test is carried out of gradual change of setting (continuously increasing simulation deviation).
This article compares the most commonly used methods of statistical quality control (control charts - in our case the control chart of individual values) with the Taguchi’s method of Partial Correction. The comparison applies to an actual process of hole reaming, and a test is carried out of gradual change of setting (continuously increasing simulation deviation).
This article compares the most commonly used methods of statistical quality control (control charts - in our case the control chart of individual values) with the Taguchi’s method of Partial Correction. The comparison applies to an actual process of hole reaming, and a test is carried out of gradual change of setting (continuously increasing simulation deviation).
Description
Citation
MM Science Journal. 2015, vol. 2015, issue 3, p. 701-705.
http://www.mmscience.eu/content/file/MM_Science_201539.pdf
http://www.mmscience.eu/content/file/MM_Science_201539.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
(C) MM publishing Ltd.