Quantification and Verification of Swingarm Structural characteristics through Numerical Simulation and Photogrammetry
No Thumbnail Available
Date
2024-11-28
Authors
Gregor, Lukáš
Zouhar, Jan
Kupčák, Radim
0000-0002-3364-4510Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Jan Evangelista Purkyne Univ
Altmetrics
Abstract
This article examines the torsional and vertical stiffness of a carbon fiber reinforced polymer (CFRP) single-sided swingarm for motorcycles. Using finite element analysis (FEA) and experimental measurements, the study evaluates the accuracy of stiffness simulations. Custom fixtures and a TRITOP photogrammetric system were employed to assess deformations under static loads. The results highlight discrepancies between simulation and reality, emphasizing the complexity of modeling CFRP components and the necessity of experimental validation.
Description
Citation
Manufacturing Technology. 2024, vol. 24, issue 5, p. 765-778.
https://mt.ujep.cz/pdfs/mft/2024/05/10.pdf
https://mt.ujep.cz/pdfs/mft/2024/05/10.pdf
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial 4.0 International
http://creativecommons.org/licenses/by-nc/4.0/
http://creativecommons.org/licenses/by-nc/4.0/