Facile synthesis of WO3 fibers via centrifugal spinning as an efficient UV-and VIS-light-driven photocatalyst

Loading...
Thumbnail Image
Date
2021-12-15
ORCID
Advisor
Referee
Mark
Journal Title
Journal ISSN
Volume Title
Publisher
Elsevier
Altmetrics
Abstract
This paper demonstrates, for the first time, synthesis of uniform and crystalline WO3 mesopomus fibers with a diameter of approximate to 1 mu m via centrifugal spinning. This was achieved by using a stable aqueous precursor solution based on ammonium metatungstate (AMT, (NH4)6H(2)W(12)O(40)center dot xH(2)O)) and polyvinyl pyrrolidone (PVP, (C6H9NO)(n)). Annealing at 300 degrees C for 1 h followed by an additional annealing at 500 degrees C for 6 h was conducted to obtain crystalline WO3 fibers. The resulting centrifugally spun WO3 fibers possess approx. 1.4-4 times enhancement in photocatalytic activity under UV (k = 0.0205 min(-1)) and VIS (k = 0.0109 min(-1)) light irradiation compared to that of electrospun WO3 fibers and commercially available WO3 nanoparticles. This is due to the increased specific surface area of the centrifugally spun WO3 fibers (S-BET = 22.3 m(2)/g) compared to electrospun WO3 fibers (S-BET = 7.4 m(2)/g) and WO3 nanoparticles (S-BET = 6.4 m(2)/g). On the other hand, optical properties of all tested materials (including optical band gap) were nearly the same.
Description
Citation
CERAMICS INTERNATIONAL. 2021, vol. 47, issue 24, p. 35361-35365.
https://www.sciencedirect.com/science/article/pii/S0272884221028583
Document type
Peer-reviewed
Document version
Published version
Date of access to the full text
Language of document
en
Study field
Comittee
Date of acceptance
Defence
Result of defence
Document licence
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
http://creativecommons.org/licenses/by-nc-nd/4.0/
Citace PRO