Návrh výroby napínáku řetězu
Loading...
Date
Authors
Ondráček, Pavel
ORCID
Advisor
Referee
Mark
B
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Diplomová práce je zaměřena na návrh technologie výroby napínáku řetězu. Je to prostorová součást vyrobena z ocelového plechu tloušťky 1,5 mm s povrchovou úpravou galvanickým zinkováním. Jako nejvhodnější materiál byla zvolena ocel DC01. Z možných výrobních technologií byla pro sérii 20 000 ks jako nejefektivnější zvolena výroba ve sdruženém postupovém nástroji. V navrženém nástroji složitější konstrukce s pružinami bude výroba probíhat ve čtyřech krocích, a to na excentrickém lisu LEN 63 s příslušenstvím pro podávání a odvíjení pásu plechu ze svitku. Výsledná cena napínáku řetězu včetně šroubu a dvou matic je 26 Kč.
The diploma thesis is focused on the design of the production technology of a chain tensioner. It is a spatial component made of 1.5 mm thick steel sheet with galvanized surface treatment. DC01 steel was selected as the most suitable material. When considering the production technologies, the production in a combined process tool was selected as the most efficient one for the series of 20,000 pieces. Regarding the tool of more complex design including springs, the production will be done in four steps on the LEN 63 eccentric press with accessories used for feeding and unwinding the metal sheet belt from the coil. The final price of the chain tensioner including the bolt and two nuts is 26 CZK.
The diploma thesis is focused on the design of the production technology of a chain tensioner. It is a spatial component made of 1.5 mm thick steel sheet with galvanized surface treatment. DC01 steel was selected as the most suitable material. When considering the production technologies, the production in a combined process tool was selected as the most efficient one for the series of 20,000 pieces. Regarding the tool of more complex design including springs, the production will be done in four steps on the LEN 63 eccentric press with accessories used for feeding and unwinding the metal sheet belt from the coil. The final price of the chain tensioner including the bolt and two nuts is 26 CZK.
Description
Citation
ONDRÁČEK, P. Návrh výroby napínáku řetězu [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2022.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
prof. Ing. Milan Forejt, CSc. (předseda)
doc. Ing. Zdeněk Lidmila, CSc. (místopředseda)
prof. Ing. Radim Kocich, Ph.D. (člen)
Ing. Kamil Podaný, Ph.D. (člen)
Ing. Barbora Kudláčová (člen)
Ing. Vojtěch Staněk (člen)
Date of acceptance
2022-06-22
Defence
Student představil komisi svou práci, její výstupy a závěry a zodpověděl otázky oponenta. Dále byly studentovi položeny následující dotazy:
1. K čemu slouží na součásti prolis? otázka byla částečně zodpovězena
2. Jaké jste volil tvary střižnic? otázka byla částečně zodpovězena
3. Co dále potřebuji u nástroje pracujícího se svitkem, abych měl celou výrobní linku? otázka byla plně zodpovězena
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení