Návrh a posouzení železobetonové nebo zděné konstrukce
Loading...
Date
Authors
Skočdopole, Jakub
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta stavební
Abstract
Bakalářská práce se zabývá statickým řešením ŽB stropní desky a šikmého sloupu 2NP vícepodlažního objektu. První část je věnovaná návrhu bodově podepřené desky, křížem vyztužené desky a šikmého sloupu ukloněného od svislé konstrukce o 15° dle metody mezních stavů. V program SCIA Engineer byl vytvořen prostorový 3D model, který sloužil k určení vnitřních sil v konstrukci. Správnost výsledků modelu byla ověřena metodou součtových momentů. Druhá část se zabývá studií vlivu šikmosti sloupů na konstrukci, kdy byla ukloněna jedna řada sloupů v 2NP a následně se porovnával vliv této změny na konstrukci a statický posudek. Pro studii byly zvoleny referenční sklony: 0°; 15°; 30°; 50°, kdy pro každou variantu byl vytvořen dílčí prostorový 3D model konstrukce. Přílohou bakalářské práce je podrobný statický výpočet dle platných norem ČSN EN, výkresová dokumentace a studie vlivu šikmosti jedné řady sloupů na ŽB konstrukci.
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
The bachelor's thesis deals with the static solution of the reinforced concrete ceiling slab and the inclined column of a 2-storey multi-storey building. The first part is devoted to the design of a point-supported plate, a cross-reinforced plate and an inclined column inclined by 15° from the vertical structure according to the limit state method. A spatial 3D model was created in the SCIA Engineer program, which was used to determine the internal forces in the structure. The correctness of the model results was verified by the sum of moments method. The second part deals with the study of the influence of the slope of the columns on the structure, when one row of columns in the 2nd floor was inclined and then the effect of this change on the structure and the static assessment were compared. Reference slopes chosen for the study: 0°; 15°; 30°; 50°, a partial spatial 3D model of the structure was created for each variant. The appendix of the bachelor's thesis is a detailed static calculation according to valid ČSN EN standards, drawing documentation and a study of the influence of the inclination of one row of columns on the reinforced concrete structure.
Description
Keywords
Studie šikmých sloupů, sloup, bodově podepřená deska, metoda součtových momentů, metoda konečných prvků, železobeton, metoda mezních stavů, ohyb, protlačení, řetězové zřícení, výztuž, beton, monolitická konstrukce, vnitřní síly, ocel, Study of inclined columns, column, point-supported plate, sum of moments method, finite element method, reinforced concrete, limit state method, bending, punching reinforcement, chain failure, concrete, monolithic structure, internal forces, reinforcement, steel
Citation
SKOČDOPOLE, J. Návrh a posouzení železobetonové nebo zděné konstrukce [online]. Brno: Vysoké učení technické v Brně. Fakulta stavební. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Konstrukce a dopravní stavby
Comittee
doc. Ing. Miloš Zich, Ph.D. (předseda)
doc. Ing. Radim Nečas, Ph.D. (místopředseda)
Ing. Michal Požár, Ph.D. (člen)
Ing. Ivana Švaříčková, Ph.D. (člen)
Ing. Ondřej Šimek, Ph.D. (člen)
Ing. Petr Svadbík, Ph.D. (člen)
Date of acceptance
2024-06-12
Defence
Student prezentoval výsledky své bakalářské práce před komisí a následně reagoval na připomínky oponenta.
Dotazy k bakalářské práci:
doc. Nečas – Jakým způsobem jste počítal kombinace – jsou správně uvedeny kombinační součinitele? – student odpověděl
doc. Nečas – Jaký vliv má nárust normálových sil vlivem šikmých sloupů na průhyb a ohybové momenty? – student odpověděl
doc. Zich – Jako byste integroval hodnoty z integračního pásu z výpočtového modelu a jak jste integrační pásy vytvářel? – student odpověděl
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení