Návrh výroby olejové vany
Loading...
Date
Authors
Hruška, Daniel
ORCID
Advisor
Referee
Mark
D
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Následující práce se zabývá návrhem výroby olejové vany hlubokým tažením plechu. V první části je práce zaměřena na seznámení a rozbor navrženého dílce. Dále se práce věnuje problematice hlubokého tažení plechu. V praktické části práce se provede návrh technologie výroby, technologické výpočty, návrh tažného nástroje a volba vhodného stroje. Poslední část práce je věnována numerickým simulacím pro ověření vyrobitelnosti součásti.
The following thesis deals with the design of oil bath production by deep drawing of sheet metal. In the first part the thesis is focused on acquaintance and analysis of the proposed part. The thesis also deals with the issue of deep drawing of metal sheet. In the practical part of thesis is the design of production technology, technological calculations, the design of the drawing tool and the selection of suitable machine. The last part of the thesis is devoted to numerical simulations to verify the manufacturability of the part.
The following thesis deals with the design of oil bath production by deep drawing of sheet metal. In the first part the thesis is focused on acquaintance and analysis of the proposed part. The thesis also deals with the issue of deep drawing of metal sheet. In the practical part of thesis is the design of production technology, technological calculations, the design of the drawing tool and the selection of suitable machine. The last part of the thesis is devoted to numerical simulations to verify the manufacturability of the part.
Description
Citation
HRUŠKA, D. Návrh výroby olejové vany [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2022.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Strojírenská technologie
Comittee
prof. Ing. Milan Forejt, CSc. (předseda)
doc. Ing. Zdeněk Lidmila, CSc. (místopředseda)
prof. Ing. Radim Kocich, Ph.D. (člen)
Ing. Kamil Podaný, Ph.D. (člen)
Ing. Barbora Kudláčová (člen)
Ing. Vojtěch Staněk (člen)
Date of acceptance
2022-06-22
Defence
Student představil komisi svou práci, její výstupy a závěry a zodpověděl otázky oponenta. Dále byly studentovi položeny následující dotazy:
1. Zkoušel jste reálně vyrobit tuto olejovou vanu? otázka byla plně zodpovězena
2. Jak by jste nástroj smontoval a následně rozebral? otázka byla částečně zodpovězena
3. Jak založíte polotovar a vysvětlete výpočet tažné síly? otázka byla částečně zodpovězena
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení