Metody kompenzace teplotní chyby obráběcího stroje
Loading...
Date
Authors
Hanzal, Jiří
ORCID
Advisor
Referee
Mark
D
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tepelná chyba způsobená tepelnou deformací je jedním z nejvýznamnějších faktorů ovlivňujících přesnost obráběcího stroje. Tento článek představuje přehled metod měření, regulace a kompenzace tepelné chyby. Dále se zabývá rešerší výzkumných středisek a jejich projektů. V závěru práce se zabýváme změřením teplotních odchylek na obráběcím stroji MCV 754 Quick. A pro testovaný obráběcí stroj byl sepsán metodický návrh teplotní kompenzace, který využívá model šedé neuronové sítě s konvolučním integrálem. Cílem této práce je seznámení se základním úvodem celého procesu kompenzace tepelné chyby.
Thermal error caused by the thermal deformation is one of the most significant factors influencing the accuracy of the machine tool. This paper presents an overview of the methods of measurement, regulation and compensation of thermal errors. It also deals with the research of research centers and their projects. At the end of the thesis we are dealing with measuring of temperature deviations on machine tools MCV 754 Quick. For the tested machine tool, a methodical proposal of temperature compensation was designed using the grey neural network model with convolution Integral. This paper aims to give a basic introduction of the whole process of the spindle thermal error compensation.
Thermal error caused by the thermal deformation is one of the most significant factors influencing the accuracy of the machine tool. This paper presents an overview of the methods of measurement, regulation and compensation of thermal errors. It also deals with the research of research centers and their projects. At the end of the thesis we are dealing with measuring of temperature deviations on machine tools MCV 754 Quick. For the tested machine tool, a methodical proposal of temperature compensation was designed using the grey neural network model with convolution Integral. This paper aims to give a basic introduction of the whole process of the spindle thermal error compensation.
Description
Citation
HANZAL, J. Metody kompenzace teplotní chyby obráběcího stroje [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2018.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Základy strojního inženýrství
Comittee
doc. Ing. Radek Knoflíček, Dr. (předseda)
doc. Ing. Lubomír Vašek, CSc. (místopředseda)
Ing. Jan Pavlík, Ph.D. (člen)
Ing. Zdeněk Tůma, Ph.D. (člen)
Ing. Luboš Kotek, Ph.D. (člen)
Ing. Radim Blecha, Ph.D. (člen)
Date of acceptance
2018-06-11
Defence
Prezentace
- Cíle práce
- Průzkum stavu techniky
- Příčiny teplotních deformací
- Pasivní kompenzace
- Aktivní kompenzace
- Praktická část - měření
- Metodický návrh (použití šedé neuronové sítě)
- Závěr
Student seznámil členy komise s výsledky své bakalářské práce a odpověděl na otázky oponenta.
Otázky členů komise:
- Můžete schématicky znázornit měření behem experimentu?
- Na kolika místech jste měřil teplotu?
- Teplotní vs tepelná chyba, jaký je rozdíl?
- Co je příčinou, že největší chyby jsou v osách y,z?
- Můžete konkretizovat uložení teplotní snímačů?
Student odpověděl na všechny otázky členů komise s jistými nejastnostmi.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení