Konstrukce podavače prášku pro multi-materiálový kovový 3D tisk
Loading...
Date
Authors
Kulda, Martin
ORCID
Advisor
Referee
Mark
A
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta strojního inženýrství
Abstract
Tato bakalářská práce se věnuje problematice multi-materiálového kovového 3D tisku, konkrétně způsobu přenosu materiálu mezi zásobníky a nanášení prášku na pracovní plochu. Cílem této bakalářské práce je návrh, realizace a otestování dávkovacího zařízení na doplňování nanášecí hlavice pro multi-materiálový 3D tisk kovu a optimalizací konstrukce samotné nanášecí hlavy. Na základě rešerše byly vypracovány koncepční návrhy, jež podstoupily řadu testů. Výsledky těchto testů vedly k vypracování konkrétního konstrukčního řešení, zahrnujícího jak nanášecí hlavy, tak dávkovací zařízení. Tato řešení byla následně realizována a otestována na klíčové funkce. Realizované řešení umožňuje spolehlivý přesun materiálu jak mezi zásobníky, tak i na pracovní plochu. Umožňuje také jednoduchou a rychlou výměnu samotných zásobníků v případě tisku jiné sady materiálů.
This bachelor thesis deals with the issue of multi-material metal 3D printing, specifically the method of material transfer between containers and powder application on the work surface. The aim of this bachelor thesis is to design, implement and test a dispensing device for refilling the coating head for multi-material metal 3D printing and to optimize the design of the coating head itself. Based on the research, conceptual designs were developed and subjected to a series of tests. The results of these tests led to the development of a specific design solution, including both the coating head and the dispensing device. These solutions were subsequently implemented and tested for key functions. The implemented solution enables reliable material transfer between containers as well as to the work surface. It also allows easy and quick exchange of the magazines themselves in case of printing a different set of materials.
This bachelor thesis deals with the issue of multi-material metal 3D printing, specifically the method of material transfer between containers and powder application on the work surface. The aim of this bachelor thesis is to design, implement and test a dispensing device for refilling the coating head for multi-material metal 3D printing and to optimize the design of the coating head itself. Based on the research, conceptual designs were developed and subjected to a series of tests. The results of these tests led to the development of a specific design solution, including both the coating head and the dispensing device. These solutions were subsequently implemented and tested for key functions. The implemented solution enables reliable material transfer between containers as well as to the work surface. It also allows easy and quick exchange of the magazines themselves in case of printing a different set of materials.
Description
Citation
KULDA, M. Konstrukce podavače prášku pro multi-materiálový kovový 3D tisk [online]. Brno: Vysoké učení technické v Brně. Fakulta strojního inženýrství. 2024.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Stavba strojů a zařízení
Comittee
doc. Ing. Miroslav Škopán, CSc. (předseda)
Ing. Lukáš Zeizinger, Ph.D. (člen)
Ing. Přemysl Pokorný, Ph.D. (člen)
prof. Ing. Miroslav Rousek, CSc. (místopředseda)
Ing. David Hloušek, Ph.D. (člen)
Date of acceptance
2024-06-13
Defence
Student prezentoval svou závěrečnou práci a odpověděl na otázky vedoucího i oponenta.
Dále odpovídal na dotazy členů zkušební komise a to následovně:
Jaký je důvod volby směru rotace při dávkování pomocí rotačního tělesa? - odpověděl
Jakým způsobem je udržována kontinuita materiálového toku u jehlového zasobníku? - odpověděl
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení