Výkonový audio zesilovač využívající AC/DC měnič
Loading...
Date
Authors
Melša, Vojtěch
ORCID
Advisor
Referee
Mark
C
Journal Title
Journal ISSN
Volume Title
Publisher
Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií
Abstract
Cílem práce bylo navrhnout a zkonstruovat jednoduchý audio zesilovač, který by vycházel v maximální míře ze zapojení a součástek použitých ve spínaných zdrojích (např. běžných ATX zdrojů pro počítače). Hlavní motivací k vývoji je existence velkého množství starých zdrojů, které nemají využití, a velký zájem uživatelů o stavbu domácích audio zesilovačů malého a středního výkonu. Zesilovače na bázi spínaných zdrojů mají větší účinnost a menší hmotnost, než srovnatelné zesilovače klasické konstrukce (pracující ve třídách A, AB nebo B). Jejich nevýhodou je složitější návrh a vnesení zkreslení a rušivých signálů do zesíleného signálu. V této práci bude popsán návrh na konstrukci jednoduchého zesilovače, který bude minimalizovat tyto negativní vlivy. Vzhledem k nedostatkům a špatným parametrům takto navrženého zapojení bude nakonec popsán a realizován návrh zesilovače ve třídě D.
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
The aim of this work was to design and construct a simple audio amplifier, which would be based of involvement and components used in switching power sources on the maximum degree (for example from usual ATX sources for computer). The main motivation for development is the existence of many old sources that do not use and big interest of users for the construction of home audio amplifiers for small and medium power. Amplifiers based on switching power sources with greater efficiency and less weight than comparable classic amplifiers (working in classes A, B or AB). Their disadvantage is the complicated design and introduction of distortion and spurious signals to the amplified signal. This work will be described a design of simple amplifier, which will minimize these negative effects. For shortcomings and wrong parameters this proposed involvement will be eventually described and implemented design of amplifier in class D.
Description
Citation
MELŠA, V. Výkonový audio zesilovač využívající AC/DC měnič [online]. Brno: Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií. 2012.
Document type
Document version
Date of access to the full text
Language of document
cs
Study field
Elektronika a sdělovací technika
Comittee
prof. Ing. Aleš Prokeš, Ph.D. (předseda)
doc. Ing. Jiří Šebesta, Ph.D. (místopředseda)
prof. Ing. Václav Říčný, CSc. (člen)
Ing. Michal Kubíček, Ph.D. (člen)
prof. Ing. Vladimír Wieser, Ph.D. (člen)
Ing. Roman Tkadlec, Ph.D. (člen)
Date of acceptance
2012-06-05
Defence
Student prezentuje výsledky a postupy řešení své diplomové práce. Následně odpovídá na dotazy vedoucího a oponenta práce a na dotazy členů komise.
Result of defence
práce byla úspěšně obhájena
Document licence
Standardní licenční smlouva - přístup k plnému textu bez omezení